Rev |
Log message |
Author |
Age |
Path |
224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1532d 04h |
/open8_urisc/trunk/VHDL/ |
223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1532d 21h |
/open8_urisc/trunk/VHDL/ |
222 |
Created a modified version of the epoch timer with a 32-bit, 1-uS resolution timer/comparator. |
jshamlet |
1533d 03h |
/open8_urisc/trunk/VHDL/ |
221 |
o8_vdsm8.vhd now has a default value assigned at compile time, o8_register.vhd was cleaned up some more. |
jshamlet |
1533d 21h |
/open8_urisc/trunk/VHDL/ |
220 |
More revision sections added |
jshamlet |
1533d 21h |
/open8_urisc/trunk/VHDL/ |
219 |
Added revision block and corrected creation date. |
jshamlet |
1533d 22h |
/open8_urisc/trunk/VHDL/ |
218 |
Revision sections added,
vdsm8.vhd added. |
jshamlet |
1533d 22h |
/open8_urisc/trunk/VHDL/ |
217 |
Broke out the vdsm8 as a separate entity, since it is used in several places,
Even MORE code cleanup. |
jshamlet |
1533d 22h |
/open8_urisc/trunk/VHDL/ |
216 |
Fixed missing parenthesis |
jshamlet |
1534d 00h |
/open8_urisc/trunk/VHDL/ |
215 |
More code cleanup |
jshamlet |
1534d 00h |
/open8_urisc/trunk/VHDL/ |
214 |
Initial add of some older code |
jshamlet |
1537d 22h |
/open8_urisc/trunk/VHDL/ |
213 |
Code and comment cleanup |
jshamlet |
1537d 23h |
/open8_urisc/trunk/VHDL/ |
212 |
Fixed issue with rewritten epoch timer not clearing alarm on set point write. |
jshamlet |
1538d 05h |
/open8_urisc/trunk/VHDL/ |
211 |
Ok, this time with feeling. Timer should now properly reset on interval update. |
jshamlet |
1539d 03h |
/open8_urisc/trunk/VHDL/ |
210 |
Modified the timers to reset on new interval write. This avoids an issue in the original design where the timer had to reach zero before updating, potentially causing unwanted interrupts.
Also added a flag to the CPU to allow interrupts to be processed sequentially based on the state of the I bit. This one is set to false by default, as it is a significant change in interrupt behavior. Long, and reentrant, ISRs can clear the I bit prematurely to allow themselves to be interrupted.
Lastly, added the I bit to the exported flags for possible use in memory protection schemes. |
jshamlet |
1539d 05h |
/open8_urisc/trunk/VHDL/ |
209 |
Fixed an issue in the PIT timer that caused an immediate interrupt on interval write,
Fixed an issue in the epoch timer that resulted in a spurious interrupt due to extra LSB's being set by default in the set point register,
While cleaning elsewhere, founding a spacing issue in the CPU HDL,
Added a 4k ROM and MW core. |
jshamlet |
1539d 18h |
/open8_urisc/trunk/VHDL/ |
208 |
Removed unnecessary package references |
jshamlet |
1540d 03h |
/open8_urisc/trunk/VHDL/ |
207 |
Added a simple 8-bit, fixed asynchronous serial interface with compile time settable bit-rate, parity enable, and parity mode generics. |
jshamlet |
1540d 20h |
/open8_urisc/trunk/VHDL/ |
206 |
Merged interrupt logic with other clocked process. |
jshamlet |
1544d 15h |
/open8_urisc/trunk/VHDL/ |
205 |
More code and comment cleanup for the new SDLC engine |
jshamlet |
1544d 15h |
/open8_urisc/trunk/VHDL/ |
204 |
Fixed more incorrect comments |
jshamlet |
1544d 16h |
/open8_urisc/trunk/VHDL/ |
203 |
Removed an extra delay FF from the bitclock rising edge signal for the clock slave configuration to better center the rising edge pulse on the receive signal. |
jshamlet |
1544d 22h |
/open8_urisc/trunk/VHDL/ |
202 |
Fixed receiver bug that caused false flag detection,
Split the large sdlc_serial_ctrl entity into sub-entities to make debugging easier. |
jshamlet |
1544d 22h |
/open8_urisc/trunk/VHDL/ |
201 |
Fixed comments regarding RX Checksum location |
jshamlet |
1546d 20h |
/open8_urisc/trunk/VHDL/ |
200 |
Renamed dual-port buffer to match other entities. |
jshamlet |
1546d 20h |
/open8_urisc/trunk/VHDL/ |
199 |
Added monitor ram for debugging and fixed issue with dual-port read path. |
jshamlet |
1546d 20h |
/open8_urisc/trunk/VHDL/ |
198 |
Removed debugging memory |
jshamlet |
1547d 04h |
/open8_urisc/trunk/VHDL/ |
197 |
Fixed incorrect comments |
jshamlet |
1547d 05h |
/open8_urisc/trunk/VHDL/ |
196 |
Modified the update logic to allow direct writes to offset 0xFE for refreshing the clock status. This way, any write to the clock status register will immediately be undone. (Writing 0x00 to offset 0xFF is once-more ignored) |
jshamlet |
1547d 05h |
/open8_urisc/trunk/VHDL/ |
195 |
Added dual-port RAM core for SDLC interface. |
jshamlet |
1548d 00h |
/open8_urisc/trunk/VHDL/ |