| Rev |
Log message |
Author |
Age |
Path |
| 327 |
More bug fixes:
Added write qual line to LTC2355 interface, fixed bug where output data was duplicating the lower byte in the averager, added an initial romtape.hex file |
jshamlet |
248d 08h |
/open8_urisc/trunk/VHDL/ |
| 326 |
Minor comment correction |
jshamlet |
254d 05h |
/open8_urisc/trunk/VHDL/ |
| 325 |
Added the rest of the initializers to the signal assignments |
jshamlet |
254d 06h |
/open8_urisc/trunk/VHDL/ |
| 324 |
Modified the Open8 version of the multi-channel roll average code to have separate interrupt enables for average and flush operations. Note that the flush status bit should be checked by software prior to use if the Autoflush_On_Reset generic is set TRUE.
Also adding the ROMTAPE entity, which acts as a serial-access ROM for storing strings, arrays, etc. in order to alleviate pressure on the primary program ROM. It is intended for use with loops that load fixed content from ROM. |
jshamlet |
254d 07h |
/open8_urisc/trunk/VHDL/ |
| 323 |
Forgot to add files |
jshamlet |
255d 05h |
/open8_urisc/trunk/VHDL/ |
| 322 |
Performance fixes for the LCD interface,
Fixed incorrect entity name for the dual LTC2355 IF,
Added a CPU-accessible 8-channel averager core and FIFO-style ROM |
jshamlet |
255d 05h |
/open8_urisc/trunk/VHDL/ |
| 321 |
Fixed issue with parity flag in receiver sticking |
jshamlet |
358d 22h |
/open8_urisc/trunk/VHDL/ |
| 320 |
Inverted flow control signals to match EIA-232 specification |
jshamlet |
361d 01h |
/open8_urisc/trunk/VHDL/ |
| 319 |
Fixed off-by-one error in channel count |
jshamlet |
362d 04h |
/open8_urisc/trunk/VHDL/ |
| 318 |
Added o8_scale_conv.vhd and intdiv.vhd |
jshamlet |
366d 06h |
/open8_urisc/trunk/VHDL/ |
| 317 |
Altered the reinit signal on teh adc128s022.vhd driver to be optional, and removed the "dead" signal from the upper level o8_de0_nano_adc_if.vhd code. |
jshamlet |
380d 03h |
/open8_urisc/trunk/VHDL/ |
| 316 |
More code cleanup and comments,
Removed INT_VECTOR_n constants, as they are superfluous. There are no reasonable situations in which the constants would be altered. |
jshamlet |
380d 03h |
/open8_urisc/trunk/VHDL/ |
| 315 |
Added Terasic DE0 Nano ADC interface and rolling averager. |
jshamlet |
380d 04h |
/open8_urisc/trunk/VHDL/ |
| 314 |
Code cleanup and added comments |
jshamlet |
380d 05h |
/open8_urisc/trunk/VHDL/ |
| 313 |
Added all generics to package component |
jshamlet |
380d 06h |
/open8_urisc/trunk/VHDL/ |
| 312 |
Added o8_timer24.vhd as a more flexible alternative to o8_sys_timer_ii.vhd.
Also cleaned up some comments in the HTML documentation |
jshamlet |
380d 07h |
/open8_urisc/trunk/VHDL/ |
| 310 |
Added optional DACadv signal to advance the PWM engine using an external signal. This is used to synchronize the DAC with other DACs or for streaming multiple streams across a high-speed serial link. |
jshamlet |
451d 08h |
/open8_urisc/trunk/VHDL/ |
| 308 |
|
jshamlet |
472d 23h |
/open8_urisc/trunk/VHDL/ |
| 307 |
Fixed comments on o8_version.vhd |
jshamlet |
680d 08h |
/open8_urisc/trunk/VHDL/ |
| 299 |
Modified the status_led.vhd to slow down the DIM50PCT signal to 1/32 instead of 1/2 for use with shift-register based discrete LEDs and added the ability to chain the toggle signal to save on resources as well as synchronize the "toggling" |
jshamlet |
688d 20h |
/open8_urisc/trunk/VHDL/ |
| 298 |
Fixed a long-standing bug in the SBC instruction where the 1 wasn't being added to complete the 2's complement of Rn. This was causing off-by-one errors in subtraction and negating carry only subtractions. |
jshamlet |
689d 22h |
/open8_urisc/trunk/VHDL/ |
| 297 |
Fixed register map comments |
jshamlet |
980d 06h |
/open8_urisc/trunk/VHDL/ |
| 296 |
Removed parallel interface from o8_vector_rx.vhd, modified vector_tx.vhd to use a generic for it's seed value, slight formatting change on o8_elapsed_usec.vhd. |
jshamlet |
988d 22h |
/open8_urisc/trunk/VHDL/ |
| 295 |
Undoing previous revision. UART was fine, bug reporter was not. |
jshamlet |
992d 01h |
/open8_urisc/trunk/VHDL/ |
| 294 |
Fixed an ancient bug in the parity logic that had the parity inverted. |
jshamlet |
992d 06h |
/open8_urisc/trunk/VHDL/ |
| 293 |
Fixed formatting issue in o8_sync_serial where tabs were inserted instead of spaces and fixed column spacing as a result (purely cosmetic) |
jshamlet |
1011d 06h |
/open8_urisc/trunk/VHDL/ |
| 292 |
Updated the o8_trig_delay entity by:
1) Added a global interrupt enable,
2) Added the ability to trigger on both the pre- and post-arm trigger input
3) Added the ability to read the external input on offset 7 |
jshamlet |
1082d 06h |
/open8_urisc/trunk/VHDL/ |
| 290 |
Added an additional generic "Rotation_Ignores_Carry" that removes the carry logic from the ROL/ROR instructions such that they now rotate 'normally',
Added an alias for PSR_GP4 named PSR_S, as it is now used to switch the function of the RSP instruction. The internal opcode hasn't changed, but it allows assembly code to use PSR_S or BRS/BNS when performing RSP related operations. |
jshamlet |
1124d 20h |
/open8_urisc/trunk/VHDL/ |
| 289 |
Added back the delay for the cursor home command, since it is slow on most Hitachi compatible LCD panels. |
jshamlet |
1142d 07h |
/open8_urisc/trunk/VHDL/ |
| 288 |
Removed hard-wired R/Wn output and replaced it with a note that the R/Wn line must be tied low either in firmware or on the board. |
jshamlet |
1143d 03h |
/open8_urisc/trunk/VHDL/ |
