Rev |
Log message |
Author |
Age |
Path |
192 |
Number of supported IRQs is now configurable to 14 (default), 30 or 62. |
olivier.girard |
3847d 04h |
/openmsp430/trunk/core/bench/ |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4275d 04h |
/openmsp430/trunk/core/bench/ |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4360d 02h |
/openmsp430/trunk/core/bench/ |
145 |
Add Dhrystone and CoreMark benchmarks to the simulation environment. |
olivier.girard |
4413d 03h |
/openmsp430/trunk/core/bench/ |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4482d 04h |
/openmsp430/trunk/core/bench/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4789d 04h |
/openmsp430/trunk/core/bench/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4845d 02h |
/openmsp430/trunk/core/bench/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4865d 10h |
/openmsp430/trunk/core/bench/ |
99 |
Small fix for CVER simulator support. |
olivier.girard |
4870d 04h |
/openmsp430/trunk/core/bench/ |
98 |
Added support for VCS verilog simulator.
VPD and TRN waveforms can now be generated. |
olivier.girard |
4870d 04h |
/openmsp430/trunk/core/bench/ |
94 |
Thanks to Mihai-Costin Manolescu's contribution, the simulation scripts now support the following simulators:
- Icarus Verilog
- Cver
- Verilog-XL
- NCVerilog
- Modelsim |
olivier.girard |
4874d 04h |
/openmsp430/trunk/core/bench/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4906d 04h |
/openmsp430/trunk/core/bench/ |
76 |
Add possibility to simulate C code within the "core" environment. |
olivier.girard |
4972d 03h |
/openmsp430/trunk/core/bench/ |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5081d 05h |
/openmsp430/trunk/core/bench/ |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5228d 12h |
/openmsp430/trunk/core/bench/ |
65 |
Add possibility to disable waveform dumping by setting the OMSP_NODUMP environment variable to 1. |
olivier.girard |
5239d 03h |
/openmsp430/trunk/core/bench/ |
54 |
Update FPGA projects with the combinatorial loop fixed. |
olivier.girard |
5267d 06h |
/openmsp430/trunk/core/bench/ |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5296d 05h |
/openmsp430/trunk/core/bench/ |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5296d 06h |
/openmsp430/trunk/core/bench/ |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5417d 08h |
/openmsp430/trunk/core/bench/ |
17 |
Updated header with SVN info |
olivier.girard |
5443d 03h |
/openmsp430/trunk/core/bench/ |
2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5478d 03h |
/openmsp430/trunk/core/bench/ |