Rev |
Log message |
Author |
Age |
Path |
205 |
Thanks again to Johan W. good feedback, the following updates are implemented:
- Change code to fix delta cycle issues on some simulators in mixed VHDL/Verilog environment.
- Update oscillators enable generation to relax a critical timing paths in the ASIC version.
- Add option to scan fix inverted clocks in the ASIC version (disabled by default as this is supported by most tools). |
olivier.girard |
3347d 15h |
/openmsp430/trunk/core/bench/ |
202 |
Add DMA interface support + LINT cleanup |
olivier.girard |
3361d 15h |
/openmsp430/trunk/core/bench/ |
200 |
Major verificaiton and benchmark update to support both MSPGCC and RedHat/TI GCC toolchains. |
olivier.girard |
3522d 14h |
/openmsp430/trunk/core/bench/ |
192 |
Number of supported IRQs is now configurable to 14 (default), 30 or 62. |
olivier.girard |
3922d 16h |
/openmsp430/trunk/core/bench/ |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4350d 16h |
/openmsp430/trunk/core/bench/ |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4435d 14h |
/openmsp430/trunk/core/bench/ |
145 |
Add Dhrystone and CoreMark benchmarks to the simulation environment. |
olivier.girard |
4488d 15h |
/openmsp430/trunk/core/bench/ |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4557d 16h |
/openmsp430/trunk/core/bench/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4864d 16h |
/openmsp430/trunk/core/bench/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4920d 14h |
/openmsp430/trunk/core/bench/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4940d 22h |
/openmsp430/trunk/core/bench/ |
99 |
Small fix for CVER simulator support. |
olivier.girard |
4945d 16h |
/openmsp430/trunk/core/bench/ |
98 |
Added support for VCS verilog simulator.
VPD and TRN waveforms can now be generated. |
olivier.girard |
4945d 16h |
/openmsp430/trunk/core/bench/ |
94 |
Thanks to Mihai-Costin Manolescu's contribution, the simulation scripts now support the following simulators:
- Icarus Verilog
- Cver
- Verilog-XL
- NCVerilog
- Modelsim |
olivier.girard |
4949d 16h |
/openmsp430/trunk/core/bench/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4981d 16h |
/openmsp430/trunk/core/bench/ |
76 |
Add possibility to simulate C code within the "core" environment. |
olivier.girard |
5047d 15h |
/openmsp430/trunk/core/bench/ |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5156d 17h |
/openmsp430/trunk/core/bench/ |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5304d 00h |
/openmsp430/trunk/core/bench/ |
65 |
Add possibility to disable waveform dumping by setting the OMSP_NODUMP environment variable to 1. |
olivier.girard |
5314d 15h |
/openmsp430/trunk/core/bench/ |
54 |
Update FPGA projects with the combinatorial loop fixed. |
olivier.girard |
5342d 18h |
/openmsp430/trunk/core/bench/ |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5371d 17h |
/openmsp430/trunk/core/bench/ |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5371d 18h |
/openmsp430/trunk/core/bench/ |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5492d 20h |
/openmsp430/trunk/core/bench/ |
17 |
Updated header with SVN info |
olivier.girard |
5518d 15h |
/openmsp430/trunk/core/bench/ |
2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5553d 15h |
/openmsp430/trunk/core/bench/ |