Rev |
Log message |
Author |
Age |
Path |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4333d 02h |
/openmsp430/trunk/core/bench/verilog/ |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4418d 00h |
/openmsp430/trunk/core/bench/verilog/ |
145 |
Add Dhrystone and CoreMark benchmarks to the simulation environment. |
olivier.girard |
4471d 02h |
/openmsp430/trunk/core/bench/verilog/ |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4540d 02h |
/openmsp430/trunk/core/bench/verilog/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4847d 02h |
/openmsp430/trunk/core/bench/verilog/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4903d 01h |
/openmsp430/trunk/core/bench/verilog/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4923d 08h |
/openmsp430/trunk/core/bench/verilog/ |
99 |
Small fix for CVER simulator support. |
olivier.girard |
4928d 02h |
/openmsp430/trunk/core/bench/verilog/ |
98 |
Added support for VCS verilog simulator.
VPD and TRN waveforms can now be generated. |
olivier.girard |
4928d 02h |
/openmsp430/trunk/core/bench/verilog/ |
94 |
Thanks to Mihai-Costin Manolescu's contribution, the simulation scripts now support the following simulators:
- Icarus Verilog
- Cver
- Verilog-XL
- NCVerilog
- Modelsim |
olivier.girard |
4932d 02h |
/openmsp430/trunk/core/bench/verilog/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4964d 03h |
/openmsp430/trunk/core/bench/verilog/ |
76 |
Add possibility to simulate C code within the "core" environment. |
olivier.girard |
5030d 02h |
/openmsp430/trunk/core/bench/verilog/ |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5139d 04h |
/openmsp430/trunk/core/bench/verilog/ |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5286d 11h |
/openmsp430/trunk/core/bench/verilog/ |
65 |
Add possibility to disable waveform dumping by setting the OMSP_NODUMP environment variable to 1. |
olivier.girard |
5297d 01h |
/openmsp430/trunk/core/bench/verilog/ |
54 |
Update FPGA projects with the combinatorial loop fixed. |
olivier.girard |
5325d 04h |
/openmsp430/trunk/core/bench/verilog/ |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5354d 04h |
/openmsp430/trunk/core/bench/verilog/ |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5354d 04h |
/openmsp430/trunk/core/bench/verilog/ |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5475d 06h |
/openmsp430/trunk/core/bench/verilog/ |
17 |
Updated header with SVN info |
olivier.girard |
5501d 01h |
/openmsp430/trunk/core/bench/verilog/ |
2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5536d 01h |
/openmsp430/trunk/core/bench/verilog/ |