Rev |
Log message |
Author |
Age |
Path |
130 |
Fixed POP.B bug (see Bugtracker http://opencores.org/bug,assign,2137 ) |
olivier.girard |
4514d 21h |
/openmsp430/trunk/core/rtl/ |
128 |
Fixed CALL x(SR) bug (see Bugtracker http://opencores.org/bug,view,2111 ) |
olivier.girard |
4590d 22h |
/openmsp430/trunk/core/rtl/ |
117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4766d 23h |
/openmsp430/trunk/core/rtl/ |
112 |
Modified comment. |
olivier.girard |
4799d 22h |
/openmsp430/trunk/core/rtl/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4800d 22h |
/openmsp430/trunk/core/rtl/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4856d 21h |
/openmsp430/trunk/core/rtl/ |
105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4871d 21h |
/openmsp430/trunk/core/rtl/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4877d 04h |
/openmsp430/trunk/core/rtl/ |
102 |
Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:
- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+ |
olivier.girard |
4877d 21h |
/openmsp430/trunk/core/rtl/ |
101 |
Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. |
olivier.girard |
4877d 22h |
/openmsp430/trunk/core/rtl/ |
91 |
Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface. |
olivier.girard |
4889d 23h |
/openmsp430/trunk/core/rtl/ |
86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4912d 20h |
/openmsp430/trunk/core/rtl/ |
85 |
Diverse RTL cosmetic updates. |
olivier.girard |
4912d 22h |
/openmsp430/trunk/core/rtl/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4917d 23h |
/openmsp430/trunk/core/rtl/ |
79 |
Update the GPIO peripheral to fix a potential synchronization issue. |
olivier.girard |
4978d 23h |
/openmsp430/trunk/core/rtl/ |
74 |
Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly. |
olivier.girard |
5065d 23h |
/openmsp430/trunk/core/rtl/ |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5093d 00h |
/openmsp430/trunk/core/rtl/ |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5240d 07h |
/openmsp430/trunk/core/rtl/ |
66 |
The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code. |
olivier.girard |
5240d 10h |
/openmsp430/trunk/core/rtl/ |
60 |
Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ). |
olivier.girard |
5271d 21h |
/openmsp430/trunk/core/rtl/ |
57 |
Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file. |
olivier.girard |
5273d 20h |
/openmsp430/trunk/core/rtl/ |
53 |
Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)
Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch. |
olivier.girard |
5279d 00h |
/openmsp430/trunk/core/rtl/ |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5307d 23h |
/openmsp430/trunk/core/rtl/ |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5308d 00h |
/openmsp430/trunk/core/rtl/ |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5429d 02h |
/openmsp430/trunk/core/rtl/ |
17 |
Updated header with SVN info |
olivier.girard |
5454d 21h |
/openmsp430/trunk/core/rtl/ |
2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5489d 21h |
/openmsp430/trunk/core/rtl/ |