Rev |
Log message |
Author |
Age |
Path |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4276d 18h |
/openmsp430/trunk/core/rtl/ |
151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4361d 16h |
/openmsp430/trunk/core/rtl/ |
149 |
Update simulation regression result parser.
Fixed failing SFR test (due to newer MSPGCC version).
Implement request http://opencores.org/bug,view,2171 (burst accesses through the serial debug interface) |
olivier.girard |
4364d 19h |
/openmsp430/trunk/core/rtl/ |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4483d 18h |
/openmsp430/trunk/core/rtl/ |
132 |
Update FPGA examples with the POP.B bug fix |
olivier.girard |
4496d 18h |
/openmsp430/trunk/core/rtl/ |
130 |
Fixed POP.B bug (see Bugtracker http://opencores.org/bug,assign,2137 ) |
olivier.girard |
4504d 17h |
/openmsp430/trunk/core/rtl/ |
128 |
Fixed CALL x(SR) bug (see Bugtracker http://opencores.org/bug,view,2111 ) |
olivier.girard |
4580d 18h |
/openmsp430/trunk/core/rtl/ |
117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4756d 19h |
/openmsp430/trunk/core/rtl/ |
112 |
Modified comment. |
olivier.girard |
4789d 18h |
/openmsp430/trunk/core/rtl/ |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4790d 18h |
/openmsp430/trunk/core/rtl/ |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4846d 17h |
/openmsp430/trunk/core/rtl/ |
105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4861d 18h |
/openmsp430/trunk/core/rtl/ |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4867d 00h |
/openmsp430/trunk/core/rtl/ |
102 |
Fixed bug reported by Mihai ( http://opencores.org/bug,view,1955 ).
The following PUSH instructions are now working as expected:
- indexed mode: PUSH x(R1)
- indirect register mode: PUSH @R1
- indirect autoincrement: PUSH @R1+ |
olivier.girard |
4867d 17h |
/openmsp430/trunk/core/rtl/ |
101 |
Cosmetic change in order to prevent an X propagation whenever executing a byte instruction with an uninitialized memory location as source. |
olivier.girard |
4867d 19h |
/openmsp430/trunk/core/rtl/ |
91 |
Fixed bug when an IRQ arrives while CPU is halted through the serial debug interface.
This bug is CRITICAL for people using working with interrupts and the Serial Debug Interface. |
olivier.girard |
4879d 19h |
/openmsp430/trunk/core/rtl/ |
86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4902d 16h |
/openmsp430/trunk/core/rtl/ |
85 |
Diverse RTL cosmetic updates. |
olivier.girard |
4902d 18h |
/openmsp430/trunk/core/rtl/ |
84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4907d 19h |
/openmsp430/trunk/core/rtl/ |
79 |
Update the GPIO peripheral to fix a potential synchronization issue. |
olivier.girard |
4968d 19h |
/openmsp430/trunk/core/rtl/ |
74 |
Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly. |
olivier.girard |
5055d 19h |
/openmsp430/trunk/core/rtl/ |
72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5082d 20h |
/openmsp430/trunk/core/rtl/ |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5230d 03h |
/openmsp430/trunk/core/rtl/ |
66 |
The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code. |
olivier.girard |
5230d 07h |
/openmsp430/trunk/core/rtl/ |
60 |
Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ). |
olivier.girard |
5261d 18h |
/openmsp430/trunk/core/rtl/ |
57 |
Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file. |
olivier.girard |
5263d 16h |
/openmsp430/trunk/core/rtl/ |
53 |
Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)
Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch. |
olivier.girard |
5268d 21h |
/openmsp430/trunk/core/rtl/ |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5297d 20h |
/openmsp430/trunk/core/rtl/ |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5297d 21h |
/openmsp430/trunk/core/rtl/ |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5418d 22h |
/openmsp430/trunk/core/rtl/ |