Rev |
Log message |
Author |
Age |
Path |
848 |
or1200: l.lws support
Using the l.lws instruction doesn't work currently.
It simply skips the instruction. No exception or reaction.
The patch attached simply duplicates the behaviour of
l.lwz for l.lws.
Patch by: Jeppe Græsdal Johansen <jjohan07@student.aau.dk> |
stekern |
4251d 04h |
/openrisc/trunk/orpsocv2/ |
815 |
OR1200 debug unit: prevent deadlock when trap instruction stalls
As per mailing list post <20120925160925.5725e06f@latmask.vernier.se>,
the debug unit could deadlock with the instruction decoder if the trap
instruction is held back by a pipeline stall. This change prevents that.
The problem can be reproduced by placing a breakpoint at an unfavorable
position with instruction cache enabled. In our test, this occurred
with or1200-cbasic when placing a breakpoint at test_bss using gdb, but
this is dependent on such factors as cache parameters and compilation
result. |
yannv |
4271d 22h |
/openrisc/trunk/orpsocv2/ |
814 |
orpsoc/or1200: Set correct PC after reset when parameter boot_adr is used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4286d 15h |
/openrisc/trunk/orpsocv2/ |
807 |
ORPSoC: Commit for bug 85 - add DSX support to OR1200.
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=85
Also added software tests, and added these tests to default regression test list |
julius |
4402d 08h |
/openrisc/trunk/orpsocv2/ |
805 |
ORPSoC: Fix for bug 90 - EPCR on range exception bug
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=90 |
julius |
4402d 09h |
/openrisc/trunk/orpsocv2/ |
803 |
ORPSoC: Fix for bug 91, l.sub not setting overflow flag correctly
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=91 |
julius |
4402d 09h |
/openrisc/trunk/orpsocv2/ |
801 |
ORPSoC: Fix bug 88
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=88 |
julius |
4407d 14h |
/openrisc/trunk/orpsocv2/ |
794 |
ORPSoC, or1200: split out or1200_fpu_intfloat_conv_except module into own file
Fixes lint warnings. |
julius |
4441d 00h |
/openrisc/trunk/orpsocv2/ |
789 |
ORPSoC: Patch from R Diez to make RTL sim report l.nops have equivalent formatting to those from or1ksim
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4465d 13h |
/openrisc/trunk/orpsocv2/ |
788 |
or1200: Patch from R Diez to remove l.cust5 signal from a sensitivty list when it's not defined.
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4465d 14h |
/openrisc/trunk/orpsocv2/ |
679 |
Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4489d 14h |
/openrisc/trunk/orpsocv2/ |
677 |
atlys: add 2-clock synchronizer chain for ddr2_calib_done
The signal ddr2_calib_done signal comes from the ddr2 clock domain,
while wb_req is treating it as if it came from wb_clk domain. As a
result the timing analysis tool assumed a worst case scenario of 5ns
between the two domains and the results were miserable.
While we can argue that this is a multi-cycle path, the fact is that
ddr2_calib_done feeds into multiple logic sinks and can potentially
cause meta-stability issue in the design. The solution is to add a
2-clock meta-stability filter to address both the timing problems and
the meta-stability concern.
Signed-off-by: Jason Zheng <jxzheng@gmail.com>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Olof Kindgren <olof.kindgren@orsoc.se> |
stekern |
4497d 16h |
/openrisc/trunk/orpsocv2/ |
673 |
Multiple 64-bit fixes (mostly sign and size of constants). Fix bug #1. |
yannv |
4564d 18h |
/openrisc/trunk/orpsocv2/ |
672 |
ORPSoC: Fix Bug 76 - Incorrect unsigned integer less-than compare with COMP3 option enabled
OR1200 RTL fix and software test added. |
julius |
4568d 09h |
/openrisc/trunk/orpsocv2/ |
671 |
ORPSoC: Fix for Bug 75 - or1200-except and or1200-ticksyscall regression tests failing due to change in memory model |
julius |
4568d 10h |
/openrisc/trunk/orpsocv2/ |
662 |
minor corrections to clean simulation files |
paknick |
4594d 14h |
/openrisc/trunk/orpsocv2/ |
661 |
added makefile for icarus simulation |
paknick |
4594d 15h |
/openrisc/trunk/orpsocv2/ |
660 |
updated makefiles for simulation with altera ordb2a-ep4ce22 |
paknick |
4594d 17h |
/openrisc/trunk/orpsocv2/ |
656 |
orpsoc: cfi_ctrl software driver fix to allow compilation when it's not used |
julius |
4619d 11h |
/openrisc/trunk/orpsocv2/ |
655 |
ORPSoC: add CFI flash controller to ml501, sw driver, tests, app, documentation |
julius |
4619d 11h |
/openrisc/trunk/orpsocv2/ |
652 |
Fix make compile.tcl for actel backend |
yannv |
4627d 18h |
/openrisc/trunk/orpsocv2/ |
651 |
ORPSoC: The ability to use a free/gimped version of Modelsim was restricted to
the reference build's scripts. This patch adds support for it to the
scripts for the board builds as well.
Signed-off-by: Julius Baxter <julius at opencores.org>
acked-by: Stefan Kristiansson <stefan.kristiansson at saunalahti.fi> |
julius |
4632d 13h |
/openrisc/trunk/orpsocv2/ |
650 |
ORPSoC: documentation update to fix explanation of Xilinx environment setup, add section for Atlys board, various cleanups |
julius |
4633d 11h |
/openrisc/trunk/orpsocv2/ |
638 |
orpsoc: xilinx: use XILINX env variable
instead of rely on custom environment variables,
use the XILINX variable and instruct the user how to
source the scripts that set it.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4674d 05h |
/openrisc/trunk/orpsocv2/ |
634 |
orpsoc: atlys: autoregenerate coregen cores
Instead of keeping binary .ngc files of the coregen
generated cores, use coregen to generate them from the .xco
and .cgp file |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |
633 |
orpsoc: add Digilent Atlys spartan6 board README
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |
632 |
orpsoc: add Digilent Atlys spartan6 board sw include file
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |
631 |
orpsoc: add Digilent Atlys spartan6 board testbench
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |
630 |
orpsoc: add Digilent Atlys spartan6 board backend
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |
629 |
orpsoc: add Digilent Atlys spartan6 board or1ksim configuration
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4679d 04h |
/openrisc/trunk/orpsocv2/ |