OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [orpsocv2/] [rtl/] [verilog/] - Rev 476

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
476 ORPSoC updates. Added 16kB cache options to OR1200, now as default on reference design. Cleaned up simulation Makefile more. julius 4893d 22h /openrisc/trunk/orpsocv2/rtl/verilog/
462 ORPSoC SystemC wrapper updates, monitor output more similar to or1ksim.

RAM models updated.		 julius 4901d 04h /openrisc/trunk/orpsocv2/rtl/verilog/
456 ORPSoCv2 or1200 - SPRs module format and comment update. Or1200 monitor Verilog now displays report and exit l.nops to stdout by default. julius 4912d 21h /openrisc/trunk/orpsocv2/rtl/verilog/
439 ORPSoC update

Ethernet MAC synthesis issues with Actel Synplify D-2009.12A
Ethernet MAC FIFO synthesis issues with Xilinx XST

Multiply/divide tests for to run on target.

Added third interface to ram_wb module, changed reference design RAM to ram_wb
wrapper. Updated verilog and system C monitor modules accordingly.

Added ability to use ram_wb as internal memory on ML501 design.

Fixed ethernet MAC tests for ML501.		 julius 4932d 19h /openrisc/trunk/orpsocv2/rtl/verilog/
435 ORPSoC updates
OR1200 multiply/MAC/division unit update with serial multiply and
divide options. Full divide not synthesizable yet.
New software tests of multiply and divide functionality.		 julius 4939d 11h /openrisc/trunk/orpsocv2/rtl/verilog/
426 ORPSoC update

Reverted back to previous OR1200 instruction cache.
(...which...)
Fixed or1200-except test failure on generic model.

ML501 build not passing or1200-except test. Tried disabling
burst on the bus (memory server doesn't support it yet) to
no avail. To be continued...		 julius 4952d 10h /openrisc/trunk/orpsocv2/rtl/verilog/
415 ORPSoC - ML501 update, working again.
Documentation update including information on ML501 build
OR1200 updates to do with instruction cache tag signal when
invalidate instruction used.
Added ability to define address to pass to SPI flash when
booting.
Added SPI sw test for board which allows inspection of
data in a flash.		 julius 4960d 20h /openrisc/trunk/orpsocv2/rtl/verilog/
412 ORPSoC update - Rearranged Xilinx ML501, simulations working again. julius 4964d 10h /openrisc/trunk/orpsocv2/rtl/verilog/
411 Improved ethmac testbench and software.

Renamed some OR1200 library functions to be more generic.

Fixed bug with versatile_mem_ctrl for Actel board.

Added ability to simulate gatelevel modules alongside RTL modules
in board build.		 julius 4964d 22h /openrisc/trunk/orpsocv2/rtl/verilog/
409 ORPSoC: Renamed eth core to ethmac (correct name), added drivers for it.
Updated ethernet MAC's instantiation in ORDB1A3PE1500 board build.
Updated documentation.		 julius 4965d 22h /openrisc/trunk/orpsocv2/rtl/verilog/
408 ORPSoC update - adding support for ORSoC development board, many changes, documentation update, too. julius 4966d 10h /openrisc/trunk/orpsocv2/rtl/verilog/
403 ORPSoC big upgrade - intermediate check in. Lots still missing. To come very shortly. julius 4967d 15h /openrisc/trunk/orpsocv2/rtl/verilog/
397 ORPSoCv2:

doc/ path added, with Texinfo documentation. Still a work in progress.

VPI files updated.

OR1200 l.maci instruction test added. highlighting bug with immediate field for that instruction.

Various cycle accurate model updates. Now uses orpsoc-defines.v (processed C-compat. version) to build.		 julius 4969d 21h /openrisc/trunk/orpsocv2/rtl/verilog/
392 ORPSoCv2 software path reorganisation stage 1. julius 4973d 12h /openrisc/trunk/orpsocv2/rtl/verilog/
391 Removing modules no longer needed in ORPSoCv2 julius 4974d 13h /openrisc/trunk/orpsocv2/rtl/verilog/
373 ORPSoCv2 software update for compatibility with OR toolchain 1.0 julius 5005d 20h /openrisc/trunk/orpsocv2/rtl/verilog/
364 OR1200 passes verilator lint. Mainly fixes to widths, and all case statements
altered to casez and Xs changed to ?s.

OR1200 PIC default width back to 31 (was accidentally changed to ORPSoC's 20
last checkin)

OR1200 spec updated to version 0.9, various updates.

OR1200 in ORPSoC and main OR1200 in sync, only difference is defines.		 julius 5017d 17h /openrisc/trunk/orpsocv2/rtl/verilog/
363 ORPSoC's RTL code fixed to pass linting by Verilator.

ORPSoC's debug interface disabled for now in both RTL and System C top level.

Profiled building of cycle-accurate model now done correctly.		 julius 5018d 03h /openrisc/trunk/orpsocv2/rtl/verilog/
362 ORPSoCv2 verilator building working again. Board build fixes to follow julius 5019d 12h /openrisc/trunk/orpsocv2/rtl/verilog/
361 OPRSoCv2 - adding things left out in last check-in julius 5019d 17h /openrisc/trunk/orpsocv2/rtl/verilog/
360 First checkin of new ORPSoC set up - more to come, all but RTL tests temporarily broken julius 5019d 17h /openrisc/trunk/orpsocv2/rtl/verilog/
358 OR1200's reset now configurable as active high or active low. Thanks to patch
from OpenCores contributor Kuoping.

Updated OR1200 in ORPSoCv2 and OR1200 project.		 julius 5020d 02h /openrisc/trunk/orpsocv2/rtl/verilog/
356 Added new simple MAC test to ORPSoC test suite:
* orpsocv2/sw/or1200asm/or1200asm-mac.S: Added

Fixed MAC pipeline issue in OR1200
* or1200/rtl/verilog/or1200_mult_mac.v: Made mac_op valid only once per insn.
* orpsocv2/rtl/verilog/components/or1200/or1200_mult_mac.v: ""

* orpsocv2/sw/dhry/dhry.c: Changed final output to be same as ORPmon version
* orpsocv2/sim/bin/Makefile: Added new MAC test to default tests		 julius 5020d 11h /openrisc/trunk/orpsocv2/rtl/verilog/
353 OR1200 RTL and ORPSoCv2 update, fixing Verilator build capability.
* or1200/rtl/verilog/or1200_sprs.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_sprs.v: ""
* or1200/rtl/verilog/or1200_ctrl.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_ctrl.v: ""
* or1200/rtl/verilog/or1200_except.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_except.v: ""
* orpsocv2/rtl/verilog/components/wb_ram_b3/wb_ram_b3.v: Some
Verilator related Lint issues fixed.

ORPSoCv2: Removed bus arbiter snooping functions from OrpsocAccess and
updated RAM model hooks for new RAM.
* orpsocv2/bench/sysc/include/Or1200MonitorSC.h: Remove arbiter snooping
* orpsocv2/bench/sysc/src/Or1200MonitorSC.cpp: ""
* orpsocv2/bench/sysc/include/OrpsocAccess.h: Remove arbiter snooping,
change include and classes for new RAM model.
* orpsocv2/bench/sysc/src/OrpsocAccess.cpp: ""

or_debug_proxy - fixing sleep and Windows make issues:
* or_debug_proxy/src/gdb.c: Removed all sleep - still to be fixed properly
* or_debug_proxy/Makefile: Remove VPI file when building on Cygwin (deprecated)

ORPmon play around, various changes to low level files.		 julius 5021d 19h /openrisc/trunk/orpsocv2/rtl/verilog/
351 OR1200 with icarus fixed up. MMu test fix, remove testfloat elf, adding new arbiter and RAM, may break verilator compatibility... TODO julius 5022d 17h /openrisc/trunk/orpsocv2/rtl/verilog/
350 Adding new OR1200 processor to ORPSoCv2 julius 5022d 21h /openrisc/trunk/orpsocv2/rtl/verilog/
348 First stage of ORPSoCv2 update - more to come julius 5022d 21h /openrisc/trunk/orpsocv2/rtl/verilog/
185 Adding single precision FPU to or1200, initial checkin, not fully tested yet julius 5080d 19h /openrisc/trunk/orpsocv2/rtl/verilog/
69 ORPSoC xilinx ml501 board update - added ethernet eupport and software test julius 5223d 07h /openrisc/trunk/orpsocv2/rtl/verilog/
67 New synthesizable builds of ORPSoC - first for the Xilinx ML501 Virtex 5 board, with working Xilinx MIG DDR2 Controller - added new pad option to bin2vmem, moved spi controller from or1k_startup module to its own directory julius 5226d 02h /openrisc/trunk/orpsocv2/rtl/verilog/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.