Rev |
Log message |
Author |
Age |
Path |
477 |
ORPSoC update - Added ability to enable OR1200 caches up to 32KB, which requires line size of 32bytes and 8-beat Wishbone bursts.
Changed cache sizes of both instruction and data cache of reference design to 4kB each. |
julius |
4971d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
476 |
ORPSoC updates. Added 16kB cache options to OR1200, now as default on reference design. Cleaned up simulation Makefile more. |
julius |
4971d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
462 |
ORPSoC SystemC wrapper updates, monitor output more similar to or1ksim.
RAM models updated. |
julius |
4979d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
456 |
ORPSoCv2 or1200 - SPRs module format and comment update. Or1200 monitor Verilog now displays report and exit l.nops to stdout by default. |
julius |
4990d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
439 |
ORPSoC update
Ethernet MAC synthesis issues with Actel Synplify D-2009.12A
Ethernet MAC FIFO synthesis issues with Xilinx XST
Multiply/divide tests for to run on target.
Added third interface to ram_wb module, changed reference design RAM to ram_wb
wrapper. Updated verilog and system C monitor modules accordingly.
Added ability to use ram_wb as internal memory on ML501 design.
Fixed ethernet MAC tests for ML501. |
julius |
5010d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
435 |
ORPSoC updates
OR1200 multiply/MAC/division unit update with serial multiply and
divide options. Full divide not synthesizable yet.
New software tests of multiply and divide functionality. |
julius |
5017d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
426 |
ORPSoC update
Reverted back to previous OR1200 instruction cache.
(...which...)
Fixed or1200-except test failure on generic model.
ML501 build not passing or1200-except test. Tried disabling
burst on the bus (memory server doesn't support it yet) to
no avail. To be continued... |
julius |
5030d 09h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
415 |
ORPSoC - ML501 update, working again.
Documentation update including information on ML501 build
OR1200 updates to do with instruction cache tag signal when
invalidate instruction used.
Added ability to define address to pass to SPI flash when
booting.
Added SPI sw test for board which allows inspection of
data in a flash. |
julius |
5038d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
412 |
ORPSoC update - Rearranged Xilinx ML501, simulations working again. |
julius |
5042d 09h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
411 |
Improved ethmac testbench and software.
Renamed some OR1200 library functions to be more generic.
Fixed bug with versatile_mem_ctrl for Actel board.
Added ability to simulate gatelevel modules alongside RTL modules
in board build. |
julius |
5042d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
409 |
ORPSoC: Renamed eth core to ethmac (correct name), added drivers for it.
Updated ethernet MAC's instantiation in ORDB1A3PE1500 board build.
Updated documentation. |
julius |
5043d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
408 |
ORPSoC update - adding support for ORSoC development board, many changes, documentation update, too. |
julius |
5044d 09h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
403 |
ORPSoC big upgrade - intermediate check in. Lots still missing. To come very shortly. |
julius |
5045d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
397 |
ORPSoCv2:
doc/ path added, with Texinfo documentation. Still a work in progress.
VPI files updated.
OR1200 l.maci instruction test added. highlighting bug with immediate field for that instruction.
Various cycle accurate model updates. Now uses orpsoc-defines.v (processed C-compat. version) to build. |
julius |
5047d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
392 |
ORPSoCv2 software path reorganisation stage 1. |
julius |
5051d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
391 |
Removing modules no longer needed in ORPSoCv2 |
julius |
5052d 12h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
373 |
ORPSoCv2 software update for compatibility with OR toolchain 1.0 |
julius |
5083d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
364 |
OR1200 passes verilator lint. Mainly fixes to widths, and all case statements
altered to casez and Xs changed to ?s.
OR1200 PIC default width back to 31 (was accidentally changed to ORPSoC's 20
last checkin)
OR1200 spec updated to version 0.9, various updates.
OR1200 in ORPSoC and main OR1200 in sync, only difference is defines. |
julius |
5095d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
363 |
ORPSoC's RTL code fixed to pass linting by Verilator.
ORPSoC's debug interface disabled for now in both RTL and System C top level.
Profiled building of cycle-accurate model now done correctly. |
julius |
5096d 02h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
362 |
ORPSoCv2 verilator building working again. Board build fixes to follow |
julius |
5097d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
361 |
OPRSoCv2 - adding things left out in last check-in |
julius |
5097d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
360 |
First checkin of new ORPSoC set up - more to come, all but RTL tests temporarily broken |
julius |
5097d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
358 |
OR1200's reset now configurable as active high or active low. Thanks to patch
from OpenCores contributor Kuoping.
Updated OR1200 in ORPSoCv2 and OR1200 project. |
julius |
5098d 01h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
356 |
Added new simple MAC test to ORPSoC test suite:
* orpsocv2/sw/or1200asm/or1200asm-mac.S: Added
Fixed MAC pipeline issue in OR1200
* or1200/rtl/verilog/or1200_mult_mac.v: Made mac_op valid only once per insn.
* orpsocv2/rtl/verilog/components/or1200/or1200_mult_mac.v: ""
* orpsocv2/sw/dhry/dhry.c: Changed final output to be same as ORPmon version
* orpsocv2/sim/bin/Makefile: Added new MAC test to default tests |
julius |
5098d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
353 |
OR1200 RTL and ORPSoCv2 update, fixing Verilator build capability.
* or1200/rtl/verilog/or1200_sprs.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_sprs.v: ""
* or1200/rtl/verilog/or1200_ctrl.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_ctrl.v: ""
* or1200/rtl/verilog/or1200_except.v: Verilator public and access comments
* orpsocv2/rtl/verilog/components/or1200/or1200_except.v: ""
* orpsocv2/rtl/verilog/components/wb_ram_b3/wb_ram_b3.v: Some
Verilator related Lint issues fixed.
ORPSoCv2: Removed bus arbiter snooping functions from OrpsocAccess and
updated RAM model hooks for new RAM.
* orpsocv2/bench/sysc/include/Or1200MonitorSC.h: Remove arbiter snooping
* orpsocv2/bench/sysc/src/Or1200MonitorSC.cpp: ""
* orpsocv2/bench/sysc/include/OrpsocAccess.h: Remove arbiter snooping,
change include and classes for new RAM model.
* orpsocv2/bench/sysc/src/OrpsocAccess.cpp: ""
or_debug_proxy - fixing sleep and Windows make issues:
* or_debug_proxy/src/gdb.c: Removed all sleep - still to be fixed properly
* or_debug_proxy/Makefile: Remove VPI file when building on Cygwin (deprecated)
ORPmon play around, various changes to low level files. |
julius |
5099d 18h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
351 |
OR1200 with icarus fixed up. MMu test fix, remove testfloat elf, adding new arbiter and RAM, may break verilator compatibility... TODO |
julius |
5100d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
350 |
Adding new OR1200 processor to ORPSoCv2 |
julius |
5100d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
348 |
First stage of ORPSoCv2 update - more to come |
julius |
5100d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
185 |
Adding single precision FPU to or1200, initial checkin, not fully tested yet |
julius |
5158d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |
69 |
ORPSoC xilinx ml501 board update - added ethernet eupport and software test |
julius |
5301d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/ |