| Rev |
Log message |
Author |
Age |
Path |
| 814 |
orpsoc/or1200: Set correct PC after reset when parameter boot_adr is used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4274d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 807 |
ORPSoC: Commit for bug 85 - add DSX support to OR1200.
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=85
Also added software tests, and added these tests to default regression test list |
julius |
4389d 22h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 805 |
ORPSoC: Fix for bug 90 - EPCR on range exception bug
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=90 |
julius |
4389d 22h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 803 |
ORPSoC: Fix for bug 91, l.sub not setting overflow flag correctly
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=91 |
julius |
4389d 23h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 801 |
ORPSoC: Fix bug 88
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=88 |
julius |
4395d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 794 |
ORPSoC, or1200: split out or1200_fpu_intfloat_conv_except module into own file
Fixes lint warnings. |
julius |
4428d 13h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 788 |
or1200: Patch from R Diez to remove l.cust5 signal from a sensitivty list when it's not defined.
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4453d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 679 |
Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4477d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 672 |
ORPSoC: Fix Bug 76 - Incorrect unsigned integer less-than compare with COMP3 option enabled
OR1200 RTL fix and software test added. |
julius |
4555d 23h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 619 |
ORPSoC OR1200 fix and regression test for bug 51.
signed-off Julius Baxter
reviewed by Stefan Kristiansson |
julius |
4688d 00h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 537 |
ORPSoC or1200 fix for l.rfe bug, and when multiply is disabled. |
julius |
4774d 00h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 505 |
OR1200 overflow detection fixup
SPIflash program update
or1200 driver library timer improvement |
julius |
4812d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 504 |
ORPSoC ALU update with new comparison configuration option, software test for comparisons and register file comment cleanup |
julius |
4829d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 502 |
ORPSoC update - or1200, ethmac Xilinx fifos
or1200 in ORPSoC has carry bit, overflow bit, and range exception added and tested. New software tests in ORPSoC library. Ml501 build had ethmac fifos added, and or1200_defines updated to use these new or1200 features by default |
julius |
4832d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 501 |
ORPSoC or1200 mult/mac/divide unit serial arith bug fixed.
ORPSoC or1200 defines now use serial divide by default |
julius |
4833d 03h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 499 |
ORPSoC OR1200 updates - added l.ext instructions with tests, ammended some MAC bugs, decode stage cleanup |
julius |
4833d 23h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 485 |
ORPSoC updates - or1200 monitor now has separate defines file, ethmac updates to fifos and wishbone IF, board.h changes for UART (may propegate to other drivers with multiple cores, we'll see), crt0.S for or1200 now zeros all registers on reset, adding own ethernet tests for ML501 |
julius |
4867d 12h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 479 |
ORPSoC update to ml501 board port. Memory controller caching fixed up, does multiple lines of cache and Wishbone bursting. |
julius |
4885d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 478 |
ORPSoC update - ml501 or1200 cache configuration set to maximum, some cleanups. |
julius |
4887d 08h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 477 |
ORPSoC update - Added ability to enable OR1200 caches up to 32KB, which requires line size of 32bytes and 8-beat Wishbone bursts.
Changed cache sizes of both instruction and data cache of reference design to 4kB each. |
julius |
4887d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 476 |
ORPSoC updates. Added 16kB cache options to OR1200, now as default on reference design. Cleaned up simulation Makefile more. |
julius |
4888d 09h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 462 |
ORPSoC SystemC wrapper updates, monitor output more similar to or1ksim.
RAM models updated. |
julius |
4895d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 456 |
ORPSoCv2 or1200 - SPRs module format and comment update. Or1200 monitor Verilog now displays report and exit l.nops to stdout by default. |
julius |
4907d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 435 |
ORPSoC updates
OR1200 multiply/MAC/division unit update with serial multiply and
divide options. Full divide not synthesizable yet.
New software tests of multiply and divide functionality. |
julius |
4933d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 426 |
ORPSoC update
Reverted back to previous OR1200 instruction cache.
(...which...)
Fixed or1200-except test failure on generic model.
ML501 build not passing or1200-except test. Tried disabling
burst on the bus (memory server doesn't support it yet) to
no avail. To be continued... |
julius |
4946d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 415 |
ORPSoC - ML501 update, working again.
Documentation update including information on ML501 build
OR1200 updates to do with instruction cache tag signal when
invalidate instruction used.
Added ability to define address to pass to SPI flash when
booting.
Added SPI sw test for board which allows inspection of
data in a flash. |
julius |
4955d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 412 |
ORPSoC update - Rearranged Xilinx ML501, simulations working again. |
julius |
4958d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 411 |
Improved ethmac testbench and software.
Renamed some OR1200 library functions to be more generic.
Fixed bug with versatile_mem_ctrl for Actel board.
Added ability to simulate gatelevel modules alongside RTL modules
in board build. |
julius |
4959d 08h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 403 |
ORPSoC big upgrade - intermediate check in. Lots still missing. To come very shortly. |
julius |
4962d 02h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
| 364 |
OR1200 passes verilator lint. Mainly fixes to widths, and all case statements
altered to casez and Xs changed to ?s.
OR1200 PIC default width back to 31 (was accidentally changed to ORPSoC's 20
last checkin)
OR1200 spec updated to version 0.9, various updates.
OR1200 in ORPSoC and main OR1200 in sync, only difference is defines. |
julius |
5012d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
