Rev |
Log message |
Author |
Age |
Path |
853 |
Declare pcreg_boot before usage
When things were moved around in rev 813, this error was introduced
Signed-off-by: Olof Kindgren <olof at opencores.org>
acked-by: Julius Baxter <julius at opencores.org> |
olof |
4249d 18h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
850 |
or1200_genpc: fix ipcu_cycstb_o generation
In some circumstances the CPU is still waiting for the lsu to finish
while in a pre branch state. However, ipcu_cycstb_o is set and the cycle
starts with the wrong address on the iwb bus (the one before the
branched address).
This fixes this issue.
Patch by: Franck Jullien <franck.jullien@gmail.com> |
stekern |
4264d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
849 |
or1200: Fix for cache bug related to first_{hit|miss}_ack
Under certain circumstances, when first_hit_ack and
first_miss_ack is asserted at the same time, cache data
would wrongly be overwritten with bus data.
Patch by: Matthew Hicks <firefalcon@gmail.com> |
stekern |
4264d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
848 |
or1200: l.lws support
Using the l.lws instruction doesn't work currently.
It simply skips the instruction. No exception or reaction.
The patch attached simply duplicates the behaviour of
l.lwz for l.lws.
Patch by: Jeppe Græsdal Johansen <jjohan07@student.aau.dk> |
stekern |
4264d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
815 |
OR1200 debug unit: prevent deadlock when trap instruction stalls
As per mailing list post <20120925160925.5725e06f@latmask.vernier.se>,
the debug unit could deadlock with the instruction decoder if the trap
instruction is held back by a pipeline stall. This change prevents that.
The problem can be reproduced by placing a breakpoint at an unfavorable
position with instruction cache enabled. In our test, this occurred
with or1200-cbasic when placing a breakpoint at test_bss using gdb, but
this is dependent on such factors as cache parameters and compilation
result. |
yannv |
4285d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
814 |
orpsoc/or1200: Set correct PC after reset when parameter boot_adr is used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4299d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
807 |
ORPSoC: Commit for bug 85 - add DSX support to OR1200.
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=85
Also added software tests, and added these tests to default regression test list |
julius |
4415d 14h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
805 |
ORPSoC: Fix for bug 90 - EPCR on range exception bug
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=90 |
julius |
4415d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
803 |
ORPSoC: Fix for bug 91, l.sub not setting overflow flag correctly
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=91 |
julius |
4415d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
801 |
ORPSoC: Fix bug 88
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=88 |
julius |
4420d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
794 |
ORPSoC, or1200: split out or1200_fpu_intfloat_conv_except module into own file
Fixes lint warnings. |
julius |
4454d 05h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
788 |
or1200: Patch from R Diez to remove l.cust5 signal from a sensitivty list when it's not defined.
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4478d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
679 |
Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4502d 20h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
672 |
ORPSoC: Fix Bug 76 - Incorrect unsigned integer less-than compare with COMP3 option enabled
OR1200 RTL fix and software test added. |
julius |
4581d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
619 |
ORPSoC OR1200 fix and regression test for bug 51.
signed-off Julius Baxter
reviewed by Stefan Kristiansson |
julius |
4713d 17h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
537 |
ORPSoC or1200 fix for l.rfe bug, and when multiply is disabled. |
julius |
4799d 16h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
505 |
OR1200 overflow detection fixup
SPIflash program update
or1200 driver library timer improvement |
julius |
4837d 23h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
504 |
ORPSoC ALU update with new comparison configuration option, software test for comparisons and register file comment cleanup |
julius |
4854d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
502 |
ORPSoC update - or1200, ethmac Xilinx fifos
or1200 in ORPSoC has carry bit, overflow bit, and range exception added and tested. New software tests in ORPSoC library. Ml501 build had ethmac fifos added, and or1200_defines updated to use these new or1200 features by default |
julius |
4857d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
501 |
ORPSoC or1200 mult/mac/divide unit serial arith bug fixed.
ORPSoC or1200 defines now use serial divide by default |
julius |
4858d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
499 |
ORPSoC OR1200 updates - added l.ext instructions with tests, ammended some MAC bugs, decode stage cleanup |
julius |
4859d 15h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
485 |
ORPSoC updates - or1200 monitor now has separate defines file, ethmac updates to fifos and wishbone IF, board.h changes for UART (may propegate to other drivers with multiple cores, we'll see), crt0.S for or1200 now zeros all registers on reset, adding own ethernet tests for ML501 |
julius |
4893d 04h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
479 |
ORPSoC update to ml501 board port. Memory controller caching fixed up, does multiple lines of cache and Wishbone bursting. |
julius |
4911d 08h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
478 |
ORPSoC update - ml501 or1200 cache configuration set to maximum, some cleanups. |
julius |
4913d 00h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
477 |
ORPSoC update - Added ability to enable OR1200 caches up to 32KB, which requires line size of 32bytes and 8-beat Wishbone bursts.
Changed cache sizes of both instruction and data cache of reference design to 4kB each. |
julius |
4913d 08h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
476 |
ORPSoC updates. Added 16kB cache options to OR1200, now as default on reference design. Cleaned up simulation Makefile more. |
julius |
4914d 01h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
462 |
ORPSoC SystemC wrapper updates, monitor output more similar to or1ksim.
RAM models updated. |
julius |
4921d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
456 |
ORPSoCv2 or1200 - SPRs module format and comment update. Or1200 monitor Verilog now displays report and exit l.nops to stdout by default. |
julius |
4932d 23h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
435 |
ORPSoC updates
OR1200 multiply/MAC/division unit update with serial multiply and
divide options. Full divide not synthesizable yet.
New software tests of multiply and divide functionality. |
julius |
4959d 14h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |
426 |
ORPSoC update
Reverted back to previous OR1200 instruction cache.
(...which...)
Fixed or1200-except test failure on generic model.
ML501 build not passing or1200-except test. Tried disabling
burst on the bus (memory server doesn't support it yet) to
no avail. To be continued... |
julius |
4972d 13h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200/ |