URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [rel_16/] - Rev 1179

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
1179	BIST interface added for Artisan memory instances.	simons	7704d 18h	/or1k/tags/rel_16/
1178	avoid another immu exception that should not happen	phoenix	7734d 05h	/or1k/tags/rel_16/
1177	more informative output	phoenix	7735d 12h	/or1k/tags/rel_16/
1176	Added comments.	damonb	7736d 03h	/or1k/tags/rel_16/
1174	fix for immu exceptions that never should have happened	phoenix	7737d 07h	/or1k/tags/rel_16/
1170	Added support for l.addc instruction.	csanchez	7745d 11h	/or1k/tags/rel_16/
1169	Added support for l.addc instruction.	csanchez	7745d 11h	/or1k/tags/rel_16/
1168	Added explicit alignment expressions.	csanchez	7750d 21h	/or1k/tags/rel_16/
1167	Corrected offset of TSS field within task_struct.	csanchez	7750d 21h	/or1k/tags/rel_16/
1166	Fixed problem with relocations of non-allocated sections.	csanchez	7750d 22h	/or1k/tags/rel_16/
1165	timeout bug fixed; contribution by Carlos	markom	7767d 15h	/or1k/tags/rel_16/
1161	When OR1200_NO_IMMU and OR1200_NO_IC are not both defined or undefined at the same time, results in a IC bug. Fixed.	lampret	7771d 04h	/or1k/tags/rel_16/
1160	added missing .rodata.* section into rom linker script	phoenix	7802d 04h	/or1k/tags/rel_16/
1159	No functional changes. Added defines to disable implementation of multiplier/MAC	lampret	7814d 07h	/or1k/tags/rel_16/
1158	Added simple uart test case.	lampret	7815d 08h	/or1k/tags/rel_16/
1157	Added syscall test case.	lampret	7815d 09h	/or1k/tags/rel_16/
1156	Tick timer test case added.	lampret	7816d 05h	/or1k/tags/rel_16/
1155	No functional change. Only added customization for exception vectors.	lampret	7817d 09h	/or1k/tags/rel_16/
1154	When using tty channel, put the serial port into raw mode (no echo, no CR/LF conversion, no other line discipline/buffering).	sfurman	7825d 00h	/or1k/tags/rel_16/
1153	When multiple interrupts were pending, e.g. TX buffer empty and RX available, reading the UART's IIR register could potentially clear a TX interrupt before it had been sent to the processor, thus dropping the interrupt permanently. Fix tested w/ both eCos and uclinux.	sfurman	7825d 11h	/or1k/tags/rel_16/
1152	* empty log message *	phoenix	7825d 15h	/or1k/tags/rel_16/
1151	* empty log message *	phoenix	7825d 15h	/or1k/tags/rel_16/
1150	remove unneded include	phoenix	7825d 16h	/or1k/tags/rel_16/
1149	* empty log message *	phoenix	7826d 04h	/or1k/tags/rel_16/
1148	* empty log message *	phoenix	7826d 04h	/or1k/tags/rel_16/
1147	remove unneeded include	phoenix	7826d 04h	/or1k/tags/rel_16/
1146	cygwin fix	phoenix	7826d 04h	/or1k/tags/rel_16/
1145	1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the last check-in. 2) Improve printed output from debugging-only uart_status() routine.	sfurman	7826d 05h	/or1k/tags/rel_16/
1144	Speed up gdb when running with serial targets: When generating backtraces, the prologue of each function is scanned at least three times by architecture-independent code, e.g. to determine offsets of saved registers, identify frameless functions, etc. This new code adds straightforward caching of the information gleaned by or1k_scan_prologue() on a per-frame basis rather than storing it in global static variables. (This benefits both JTAG and serial gdb targets, though the JTAG target runs fast enough that it is not particularly needed.) When the register set is dumped by the serial target, e.g. at any breakpoint or interrupt, the 32 vector/FP registers were included in the dump (each 8 bytes long), though they aren't implemented. The new code tells gdb that unimplemented registers have zero length in the dump.	sfurman	7828d 10h	/or1k/tags/rel_16/
1143	Make UART transmitter-empty interrupts match both 16450 and 16550 behavior.	sfurman	7829d 01h	/or1k/tags/rel_16/

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [tags/] [rel_16/] - Rev 1179

Filtering Options