Rev |
Log message |
Author |
Age |
Path |
1308 |
Gyorgy Jeney: extensive cleanup |
phoenix |
7299d 00h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1249 |
Downgrading back to automake-1.4 |
lampret |
7464d 00h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1244 |
Added "cm" command to copy data inside memory.
Make or1ksim work on little endian platforms.
Port to Mac OS X.
Some bugfixes.
Allow JTAG write access to read-only memory regions. |
hpanther |
7466d 09h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1241 |
make it work with MMU enabled |
phoenix |
7470d 19h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1222 |
cfmakeraw is not avaliable on cygwin |
phoenix |
7494d 21h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1165 |
timeout bug fixed; contribution by Carlos |
markom |
7705d 08h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1154 |
When using tty channel, put the serial port into raw mode (no echo, no
CR/LF conversion, no other line discipline/buffering). |
sfurman |
7762d 16h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1153 |
When multiple interrupts were pending, e.g. TX buffer empty and RX
available, reading the UART's IIR register could potentially clear a
TX interrupt before it had been sent to the processor, thus dropping
the interrupt permanently.
Fix tested w/ both eCos and uclinux. |
sfurman |
7763d 03h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1146 |
cygwin fix |
phoenix |
7763d 20h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1145 |
1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the
last check-in.
2) Improve printed output from debugging-only uart_status() routine. |
sfurman |
7763d 21h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1143 |
Make UART transmitter-empty interrupts match both 16450 and 16550 behavior. |
sfurman |
7766d 17h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1128 |
Fixed my bustage: Add missing 2nd argument to open(). Otherwise,
opening a serial port channel can sporadically fail. |
sfurman |
7773d 21h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1127 |
Added ability to map I/O from simulated UARTs to physical serial ports
on the host running the simulator. |
sfurman |
7776d 22h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1122 |
Get rid of C++ style declarations (which can appear in the middle of a block) in C program. Some older compilers complain. |
sfurman |
7806d 03h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1120 |
Fix my dumb automake bustage |
sfurman |
7806d 04h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1119 |
1) Fix the "channels:xterm" feature so that it functions on linux.
The existing implementation relies on SysV STREAMS behavior that
Linux does not possess.
2) Allow arguments to be passed to the xterm from the sim.cfg file,
e.g. to set the window dimensions or fonts.
3) Add the ability for a program to interact with the simulator UART
through a TCP socket. |
sfurman |
7807d 00h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1118 |
1) Fix the "channels:xterm" feature so that it functions on linux.
The existing implementation relies on SysV STREAMS behavior that
Linux does not possess.
2) Allow arguments to be passed to the xterm from the sim.cfg file,
e.g. to set the window dimensions or fonts.
3) Add the ability for a program to interact with the simulator UART
through a TCP socket. |
sfurman |
7807d 00h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1117 |
Ignore generated files for CVS purposes |
sfurman |
7807d 00h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1116 |
There was a bug in the simulator's UART implementation that caused the
UART's LSR register to become corrupted. This was due to an
assumption that 'char' is an unsigned type, but that is not true on
all platforms.
When the char type is signed and a character is read in the range
0x80-0xff, the high bit is sign-extended into the upper bits of an
entry in the receive FIFO. When the character reaches the head of the
FIFO, the upper bits of the FIFO entry are OR'ed into the LSR, causing
the LSR to be set to 0xFF.
A simple cast fixes the problem. |
sfurman |
7807d 01h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1100 |
cvs problem fixed |
markom |
7893d 12h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1098 |
small bug in cuc fixed |
markom |
7893d 12h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1073 |
channels support |
rprescott |
7932d 05h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1070 |
Channels (fd,file,xterm) first import |
rprescott |
7932d 06h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1068 |
Minimum packet length cheching changed to present the real hw. |
simons |
7933d 22h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1067 |
Changed main structure. |
rherveille |
7936d 14h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1065 |
Removed trailing ' \' used to continue code on the next line.
This caused problems with some compilers. |
rherveille |
7939d 10h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1058 |
Different memory controller. |
simons |
7971d 03h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1019 |
fixed some bugs detected by Bender hardware |
rherveille |
7988d 04h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
1018 |
TX_BD_NUM register now contains a real number of transmit BDs (before this was n*2) |
simons |
7988d 10h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |
997 |
PRINTF should be used instead of printf; command redirection repaired |
markom |
7995d 15h |
/or1k/tags/stable_0_2_0/or1ksim/peripheral/ |