Rev |
Log message |
Author |
Age |
Path |
1765 |
|
root |
5579d 09h |
/or1k/trunk/gdb-5.0/gdb/config/ |
1152 |
*** empty log message *** |
phoenix |
7738d 15h |
/or1k/trunk/gdb-5.0/gdb/config/ |
1149 |
*** empty log message *** |
phoenix |
7739d 04h |
/or1k/trunk/gdb-5.0/gdb/config/ |
1142 |
Speed up gdb when running with serial targets:
When generating backtraces, the prologue of each function is scanned
at least three times by architecture-independent code, e.g. to
determine offsets of saved registers, identify frameless functions,
etc. This new code adds straightforward caching of the information
gleaned by or1k_scan_prologue() on a per-frame basis rather than
storing it in global static variables. (This benefits both JTAG and
serial gdb targets, though the JTAG target runs fast enough that it is
not particularly needed.)
When the register set is dumped by the serial target, e.g. at any
breakpoint or interrupt, the 32 vector/FP registers were included in
the dump (each 8 bytes long), though they aren't implemented. The new
code tells gdb that unimplemented registers have zero length in the
dump. |
sfurman |
7742d 01h |
/or1k/trunk/gdb-5.0/gdb/config/ |
593 |
ctrl-c handling fixed |
markom |
8187d 19h |
/or1k/trunk/gdb-5.0/gdb/config/ |
403 |
Prompt changed because ddd requires (gdb). |
simons |
8232d 22h |
/or1k/trunk/gdb-5.0/gdb/config/ |
372 |
steps toward joining or32.c and opcode/or32.h of or1ksim and gdb; added opcodes/or32.c; more detailed gdb l.trap handling |
markom |
8240d 21h |
/or1k/trunk/gdb-5.0/gdb/config/ |
364 |
info spr bug fixed |
markom |
8245d 17h |
/or1k/trunk/gdb-5.0/gdb/config/ |
363 |
program can be stepped and continued before running it, supporting low level debugging |
markom |
8245d 17h |
/or1k/trunk/gdb-5.0/gdb/config/ |
362 |
some changes based on current modifications to or1k; cleaner register naming; ctrl-c causes stepi; write&read pc work on next instruction |
markom |
8245d 23h |
/or1k/trunk/gdb-5.0/gdb/config/ |
207 |
Several major changes to allow gdb to work with an Or1k implementation
that does not need a writeable PC. This version will use the breakpoint
vector and install a new vector into the EPC register, and then single
step out of the breakpoint exception. The breakpoint exception vector
must include only 2 commands: l.rfe and l.nop. Anything else and this
gdb version will fail w/ or1ksim. |
chris |
8300d 23h |
/or1k/trunk/gdb-5.0/gdb/config/ |
146 |
Mofications to work with or1ksim JTAG based simulation |
chris |
8394d 19h |
/or1k/trunk/gdb-5.0/gdb/config/ |
136 |
Fixed the DSR/DRR debug register definitions which were stored backwards |
chris |
8398d 22h |
/or1k/trunk/gdb-5.0/gdb/config/ |
126 |
Added JTAG proxy protocol definitions |
chris |
8401d 20h |
/or1k/trunk/gdb-5.0/gdb/config/ |
122 |
or1k target init call fixed.
long long type converted to LONGEST. |
markom |
8409d 01h |
/or1k/trunk/gdb-5.0/gdb/config/ |
119 |
Synchronized with or1k arch changes. |
markom |
8418d 18h |
/or1k/trunk/gdb-5.0/gdb/config/ |
118 |
Added heavy duty commands hwatch and htrace, to enable full HW debugging
support.
Repaired jtag_set_chain. |
markom |
8418d 19h |
/or1k/trunk/gdb-5.0/gdb/config/ |
116 |
small bug fixed |
markom |
8424d 18h |
/or1k/trunk/gdb-5.0/gdb/config/ |
115 |
sync to current or1k arch. |
markom |
8425d 19h |
/or1k/trunk/gdb-5.0/gdb/config/ |
113 |
Modified:
interface for or1k target - should be final
reset, stall, initialization functions
HW assisted watchpoints as far gdb supports them.
info matchpoints command added
draft hwatch command |
markom |
8426d 18h |
/or1k/trunk/gdb-5.0/gdb/config/ |
107 |
This commit was generated by cvs2svn to compensate for changes in r106,
which included commits to RCS files with non-trunk default branches. |
markom |
8432d 20h |
/or1k/trunk/gdb-5.0/gdb/config/ |