OpenCores
URL https://opencores.org/ocsvn/t400/t400/trunk

Subversion Repositories t400

[/] [t400/] [trunk/] - Rev 81

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
81 include save/restore macros arniml 6645d 22h /t400/trunk/
80 include new save/restore macros arniml 6645d 22h /t400/trunk/
79 enhance save and restore for A, M and C arniml 6645d 22h /t400/trunk/
78 provide SA at L port arniml 6646d 09h /t400/trunk/
77 initial check-in arniml 6646d 09h /t400/trunk/
76 remove tb_int_behav_c0 arniml 6646d 09h /t400/trunk/
75 initial check-in arniml 6646d 09h /t400/trunk/
74 add interrupt testbench and 'int' test class arniml 6646d 13h /t400/trunk/
73 use 'after' instead of wait for signal delay
should resolve problems with delta cycle arrival times		 arniml 6646d 13h /t400/trunk/
72 make test start more robust regarding timing arniml 6646d 13h /t400/trunk/
71 obsolete arniml 6646d 16h /t400/trunk/
70 interrupt functionality added arniml 6646d 16h /t400/trunk/
69 instrument testbench arniml 6646d 16h /t400/trunk/
68 updates for interrupt support arniml 6646d 16h /t400/trunk/
67 explicitly select clock divider 4 arniml 6646d 16h /t400/trunk/
66 explicitly select clock divider 8 arniml 6646d 16h /t400/trunk/
65 add global signals for testbench instrumentation arniml 6646d 16h /t400/trunk/
64 add fail reporting for port d arniml 6646d 16h /t400/trunk/
63 initial check-in arniml 6646d 16h /t400/trunk/
62 int target added arniml 6646d 16h /t400/trunk/
61 initial check-in arniml 6648d 20h /t400/trunk/
60 connect cko_i to bit 2 of IN bus arniml 6650d 11h /t400/trunk/
59 check CKO in general purpose configuration arniml 6650d 11h /t400/trunk/
58 consider IN port arniml 6651d 10h /t400/trunk/
57 consider CKO and IN port arniml 6651d 10h /t400/trunk/
56 drive IN port arniml 6651d 10h /t400/trunk/
55 routi CKO to t400_core arniml 6651d 10h /t400/trunk/
54 use to_X01 for primary input bus arniml 6651d 10h /t400/trunk/
53 use to_X01 for G input arniml 6651d 10h /t400/trunk/
52 + reset neg_edge flip-flops to '1'
-> after por, a 1-to-0 edge is required to trigger the latches initially
+ use to_X01		 arniml 6651d 10h /t400/trunk/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.