OpenCores
URL https://opencores.org/ocsvn/t400/t400/trunk

Subversion Repositories t400

[/] [t400/] [trunk/] [rtl/] [vhdl/] - Rev 129

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
129 assign sc_q with 0 for t41x derivatives
this prevents a dummy warning about inferring latches for sc_q		 arniml 6567d 01h /t400/trunk/rtl/vhdl/
121 remove note about limitations arniml 6572d 03h /t400/trunk/rtl/vhdl/
120 initial check-in arniml 6572d 05h /t400/trunk/rtl/vhdl/
115 use dedicated microbus cs/rd/wr strobes arniml 6572d 07h /t400/trunk/rtl/vhdl/
114 latch Q independently of in_en arniml 6572d 07h /t400/trunk/rtl/vhdl/
113 reset G(0) upon write access in microbus mode arniml 6572d 07h /t400/trunk/rtl/vhdl/
112 microbus support for IO G added arniml 6572d 07h /t400/trunk/rtl/vhdl/
110 connect microbus generic arniml 6572d 07h /t400/trunk/rtl/vhdl/
109 connect microbus generic and include generic_ram_ena arniml 6572d 07h /t400/trunk/rtl/vhdl/
108 include generic_ram_ena arniml 6572d 07h /t400/trunk/rtl/vhdl/
107 use microbus generic arniml 6572d 07h /t400/trunk/rtl/vhdl/
103 latch io_l_i upon input enable trigger arniml 6572d 13h /t400/trunk/rtl/vhdl/
102 interface comments added arniml 6572d 13h /t400/trunk/rtl/vhdl/
101 connect microbus control signals to IO L arniml 6572d 13h /t400/trunk/rtl/vhdl/
90 fix pop'ing of skip flag arniml 6580d 12h /t400/trunk/rtl/vhdl/
89 load 0x100 upon interrupt arniml 6580d 12h /t400/trunk/rtl/vhdl/
88 execute virtual NOP at location 0x0ff when vectoring to interrupt routine arniml 6580d 12h /t400/trunk/rtl/vhdl/
70 interrupt functionality added arniml 6581d 08h /t400/trunk/rtl/vhdl/
69 instrument testbench arniml 6581d 08h /t400/trunk/rtl/vhdl/
68 updates for interrupt support arniml 6581d 08h /t400/trunk/rtl/vhdl/
55 routi CKO to t400_core arniml 6586d 02h /t400/trunk/rtl/vhdl/
54 use to_X01 for primary input bus arniml 6586d 02h /t400/trunk/rtl/vhdl/
53 use to_X01 for G input arniml 6586d 02h /t400/trunk/rtl/vhdl/
52 + reset neg_edge flip-flops to '1'
-> after por, a 1-to-0 edge is required to trigger the latches initially
+ use to_X01		 arniml 6586d 02h /t400/trunk/rtl/vhdl/
49 io_in added arniml 6587d 03h /t400/trunk/rtl/vhdl/
48 instructions ININ and INIL implemented arniml 6587d 03h /t400/trunk/rtl/vhdl/
47 simplify ININ/INIL instruction support arniml 6587d 03h /t400/trunk/rtl/vhdl/
46 operations for IN port added arniml 6587d 03h /t400/trunk/rtl/vhdl/
45 initial check-in arniml 6587d 03h /t400/trunk/rtl/vhdl/
43 route cko to ALU for INIL instruction arniml 6587d 06h /t400/trunk/rtl/vhdl/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.