Rev |
Log message |
Author |
Age |
Path |
33 |
Oops -- the audio was wired audio first then the interrupt controller, not
the other way around. This adjusts regdefs to match what's on the chip. |
dgisselq |
3080d 17h |
/xulalx25soc/ |
32 |
Just noticed that the timer was fixed on this. This change adjusts the
timer to support audio at a user selectable rate. |
dgisselq |
3080d 17h |
/xulalx25soc/ |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3080d 17h |
/xulalx25soc/ |
30 |
Bug fixes. In particular, this fixes a segmentation violation. |
dgisselq |
3080d 22h |
/xulalx25soc/ |
29 |
This adds a vastly updated and superious ziprun capability to the repository.
ziprun now accepts ELF program files *only*, reads them, and places them onto
the board. This includes the ability, within the ELF file, of specifying
whether or not the data is sent to block ram, SD ram, or Flash, as well as
the ability of specifying the initial address. (Of course, that's a one time
thing--to always have the same initial address, set the address in
rtl/busmaster.v) |
dgisselq |
3081d 14h |
/xulalx25soc/ |
28 |
Oops--two files needed by zipdbg weren't originally placed in the directory. |
dgisselq |
3081d 18h |
/xulalx25soc/ |
27 |
Bug fix: the last_state register now correctly reflects all 5-bits of the state
machine. (Useful when detecting lockups ...) |
dgisselq |
3081d 18h |
/xulalx25soc/ |
26 |
Some bug fixes, and the long jump early branching integration. |
dgisselq |
3081d 18h |
/xulalx25soc/ |
25 |
Fixing compile time warnings. |
dgisselq |
3081d 18h |
/xulalx25soc/ |
24 |
Added the #define necessary to enable (and clear) SCOPE interrupts. |
dgisselq |
3087d 16h |
/xulalx25soc/ |
23 |
This fixes a bug in the early branching system, and clarifies that early
branch instructions will not affect the flags. It's a basic bug fix update. |
dgisselq |
3090d 04h |
/xulalx25soc/ |
22 |
Added the mkdatev.pl file. (Oops!) |
dgisselq |
3092d 20h |
/xulalx25soc/ |
21 |
Files, not links, to replace what were once broken links in this project. |
dgisselq |
3143d 03h |
/xulalx25soc/ |
20 |
Documents, borrowed from their source projects, and reproduced here. These
describe the various components of the board. |
dgisselq |
3143d 03h |
/xulalx25soc/ |
19 |
Step one in fixing soft link poblems. The following files were soft links,
and not brought into the svn repository properly. They'll be replaced in the
next update with their full sources. |
dgisselq |
3143d 03h |
/xulalx25soc/ |
18 |
Got the bitfile back up to speed at 80 MHz. |
dgisselq |
3146d 18h |
/xulalx25soc/ |
17 |
Some basic updates, to include adding in a missing file (zipstate). Most of
these updates include making sure that the XuLA2 device can be accessed via
the USB. (Prior versions accessed the FPGA via serial port or network ...) |
dgisselq |
3146d 18h |
/xulalx25soc/ |
16 |
Updates to allow a test of the ICAP configuration interface. |
dgisselq |
3146d 18h |
/xulalx25soc/ |
15 |
WORKING VERSION! ... or, at least the memory test works. |
dgisselq |
3148d 14h |
/xulalx25soc/ |
14 |
Quick bug fix. |
dgisselq |
3148d 14h |
/xulalx25soc/ |
13 |
This version is now working. (It probably would've worked before, but
everything is now working.) |
dgisselq |
3148d 14h |
/xulalx25soc/ |
12 |
Modified to match the settings I'm now using within ISE. |
dgisselq |
3148d 16h |
/xulalx25soc/ |
11 |
Getting software up and running on the board for the first time. (Not there
yet, but I think these items have now proven themselves.) |
dgisselq |
3148d 16h |
/xulalx25soc/ |
10 |
Changed the name of the memtest.s file. |
dgisselq |
3148d 16h |
/xulalx25soc/ |
9 |
Bug fixes, optimizations, etc. as part of building for an actual hardware
implementation. Most notably, the speed was lowered from 80MHz down to
76 MHz. |
dgisselq |
3148d 16h |
/xulalx25soc/ |
8 |
Added an interface description to the comments at the top of the file. |
dgisselq |
3151d 02h |
/xulalx25soc/ |
7 |
Mostly minor changes. Fixed the legal copyright statement in the UART files,
adjusted some comments, and made sure that the zipdbg program contained all
the latest features from our Vault. |
dgisselq |
3151d 02h |
/xulalx25soc/ |
6 |
Initial file load, likely to be buggy, but the initial load nonetheless. |
dgisselq |
3151d 12h |
/xulalx25soc/ |
5 |
Initial software version, in support of the project. At this point, they are
provided with no guarantees that they work. (They did use to work--on an older
build, but I haven't been able to verify that they work with this newer build
yet.) |
dgisselq |
3151d 12h |
/xulalx25soc/ |
4 |
Here's an initial, albeit incomplete, build. |
dgisselq |
3151d 13h |
/xulalx25soc/ |