Rev |
Log message |
Author |
Age |
Path |
40 |
This adds to dumpsdram the capability to run over a port, such as with
busmaster_tb. |
dgisselq |
3091d 03h |
/xulalx25soc/trunk/ |
39 |
An attempt at a bugfix. We'll see if this works any better downstream. |
dgisselq |
3092d 22h |
/xulalx25soc/trunk/ |
38 |
Updated to remove the build dependence upon ZipCPU. |
dgisselq |
3093d 02h |
/xulalx25soc/trunk/ |
37 |
These fixes were necessary to get the SDRAM into a working simulation
capability. It is finally what it was supposed to be: cycle accurate. Sadly,
to do this, I did need to make a subtle change to rtl/wbsdram.v. (I was having
a problem with external input clocking in Verilator. This fixes it--but its
a Verilator only change--to rtl/wbsdram.v that is.) |
dgisselq |
3093d 20h |
/xulalx25soc/trunk/ |
36 |
A linker script, appropriate to the XuLA25-LX25 SoC. |
dgisselq |
3093d 21h |
/xulalx25soc/trunk/ |
35 |
Updates the memory testing program to work successfully with the Gnu build
tools--particularly the GNU C-preprocessor from GCC and the GNU assembler from
Binutils. |
dgisselq |
3093d 21h |
/xulalx25soc/trunk/ |
34 |
Bug fix: This sets as a positive voltage bias (not negative) the maximum
value of 0x07fff, where as the negative maximum value of 0x08000 properly
(now) reflects nearly ground--as one would desire. (Last time around I had
these backwards.) |
dgisselq |
3097d 16h |
/xulalx25soc/trunk/ |
33 |
Oops -- the audio was wired audio first then the interrupt controller, not
the other way around. This adjusts regdefs to match what's on the chip. |
dgisselq |
3097d 18h |
/xulalx25soc/trunk/ |
32 |
Just noticed that the timer was fixed on this. This change adjusts the
timer to support audio at a user selectable rate. |
dgisselq |
3097d 18h |
/xulalx25soc/trunk/ |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3097d 18h |
/xulalx25soc/trunk/ |
30 |
Bug fixes. In particular, this fixes a segmentation violation. |
dgisselq |
3097d 23h |
/xulalx25soc/trunk/ |
29 |
This adds a vastly updated and superious ziprun capability to the repository.
ziprun now accepts ELF program files *only*, reads them, and places them onto
the board. This includes the ability, within the ELF file, of specifying
whether or not the data is sent to block ram, SD ram, or Flash, as well as
the ability of specifying the initial address. (Of course, that's a one time
thing--to always have the same initial address, set the address in
rtl/busmaster.v) |
dgisselq |
3098d 15h |
/xulalx25soc/trunk/ |
28 |
Oops--two files needed by zipdbg weren't originally placed in the directory. |
dgisselq |
3098d 19h |
/xulalx25soc/trunk/ |
27 |
Bug fix: the last_state register now correctly reflects all 5-bits of the state
machine. (Useful when detecting lockups ...) |
dgisselq |
3098d 19h |
/xulalx25soc/trunk/ |
26 |
Some bug fixes, and the long jump early branching integration. |
dgisselq |
3098d 19h |
/xulalx25soc/trunk/ |
25 |
Fixing compile time warnings. |
dgisselq |
3098d 20h |
/xulalx25soc/trunk/ |
24 |
Added the #define necessary to enable (and clear) SCOPE interrupts. |
dgisselq |
3104d 18h |
/xulalx25soc/trunk/ |
23 |
This fixes a bug in the early branching system, and clarifies that early
branch instructions will not affect the flags. It's a basic bug fix update. |
dgisselq |
3107d 05h |
/xulalx25soc/trunk/ |
22 |
Added the mkdatev.pl file. (Oops!) |
dgisselq |
3109d 22h |
/xulalx25soc/trunk/ |
21 |
Files, not links, to replace what were once broken links in this project. |
dgisselq |
3160d 04h |
/xulalx25soc/trunk/ |
20 |
Documents, borrowed from their source projects, and reproduced here. These
describe the various components of the board. |
dgisselq |
3160d 04h |
/xulalx25soc/trunk/ |
19 |
Step one in fixing soft link poblems. The following files were soft links,
and not brought into the svn repository properly. They'll be replaced in the
next update with their full sources. |
dgisselq |
3160d 05h |
/xulalx25soc/trunk/ |
18 |
Got the bitfile back up to speed at 80 MHz. |
dgisselq |
3163d 19h |
/xulalx25soc/trunk/ |
17 |
Some basic updates, to include adding in a missing file (zipstate). Most of
these updates include making sure that the XuLA2 device can be accessed via
the USB. (Prior versions accessed the FPGA via serial port or network ...) |
dgisselq |
3163d 19h |
/xulalx25soc/trunk/ |
16 |
Updates to allow a test of the ICAP configuration interface. |
dgisselq |
3163d 19h |
/xulalx25soc/trunk/ |
15 |
WORKING VERSION! ... or, at least the memory test works. |
dgisselq |
3165d 15h |
/xulalx25soc/trunk/ |
14 |
Quick bug fix. |
dgisselq |
3165d 15h |
/xulalx25soc/trunk/ |
13 |
This version is now working. (It probably would've worked before, but
everything is now working.) |
dgisselq |
3165d 15h |
/xulalx25soc/trunk/ |
12 |
Modified to match the settings I'm now using within ISE. |
dgisselq |
3165d 17h |
/xulalx25soc/trunk/ |
11 |
Getting software up and running on the board for the first time. (Not there
yet, but I think these items have now proven themselves.) |
dgisselq |
3165d 17h |
/xulalx25soc/trunk/ |