| Rev |
Log message |
Author |
Age |
Path |
| 74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
2933d 09h |
/xulalx25soc/trunk/rtl/ |
| 73 |
Simplified logic. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 72 |
Sets XULA25 as the default. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 71 |
Needed to play with subtle timing to get this to build. Expect me to play
with these two clock numbers more. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 70 |
Cosmetic (minor) update. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 69 |
Massive logic simplification. This is also the first (verified) working
version. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 68 |
Fixes the debug ack line, so it no longer acks when there isn't a dbg_stb.
Fixed the multiply option parameter, so it sets a 3-clock multiply properly.
Adjusted the watchdog timer so that it now produces a timer that doesn't
reload--since this is pointless for a watchdog. Finally, connects a reset
line to the DMA, to make certain that resetting the CPU will also reset any
ongoing DMA operation. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 67 |
Simplifies logic, and guarantees that the minimum set value will always
produce an int. For example, if the count was X before, setting X-1 wouldn't
produce an interrupt since it had passed. Now it produces an interrupt, and
keeps the next interrupt valid. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 66 |
Simplified logic (barely). |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 65 |
Makes the auto-reload feature a parameterized (generic) feature, so the same
code will work for both auto-reloadable and non-autoreloadable (i.e. watchdog)
timers. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 64 |
First (verified) working version. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 63 |
Simplified logic. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 62 |
Removed the pipe logic from the non-pipelined version, and made the NOOP a
specific ALU instruction so that the PC is always properly updated. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 61 |
Fixed the timing control wires: busy and valid will never both be true. Busy
will be true (now) until valid is asserted, and busy will never not be
asserted until valid is true. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 60 |
LONG_MPY upgrade. This is part of swapping out the LDIHI instruction for a
MPY, and the MPYS and MPYU instructions for MPYSHI and MPYUHI respectively. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 59 |
Simplified logic. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 58 |
Bug fix: the UART can now be reconfigured post-boot without a BREAK condition. |
dgisselq |
2933d 10h |
/xulalx25soc/trunk/rtl/ |
| 57 |
Fixed the TX/RX addresses so that they match the documentation: TX first, then
RX. |
dgisselq |
2941d 10h |
/xulalx25soc/trunk/rtl/ |
| 56 |
Brings code in line with the OpenCores core: parameterizes the reload value,
and the number of bits in the timer. |
dgisselq |
2941d 10h |
/xulalx25soc/trunk/rtl/ |
| 55 |
Updated copyright notice. |
dgisselq |
2941d 10h |
/xulalx25soc/trunk/rtl/ |
| 54 |
Updated copyright notice. |
dgisselq |
2941d 10h |
/xulalx25soc/trunk/rtl/ |
| 52 |
This brings the XuLA2-LX25 SoC up to speed with the rest of the ZipCPU, and
prepares it for the 32x32 bit multiply instruction set change. |
dgisselq |
2981d 11h |
/xulalx25soc/trunk/rtl/ |
| 51 |
Lots of bug fixes. The ugliest were in the prefetch cache, where instructions
from one cache line were being issued as valid in another. Other fixes include
pipeline fixes so that LOD (Rx),Rx; LOD(Rx),Rx works, and more. Finally, the
decode was adjusted so that brev no longer affects the flags. |
dgisselq |
2991d 09h |
/xulalx25soc/trunk/rtl/ |
| 50 |
Updates to fix some broken early branching code, both in idecode and pfcache. |
dgisselq |
3000d 12h |
/xulalx25soc/trunk/rtl/ |
| 48 |
Cleaned up the documentation a touch. It no longer reads like the bugs I used
to debug are still being debugged ... |
dgisselq |
3011d 13h |
/xulalx25soc/trunk/rtl/ |
| 46 |
This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles. |
dgisselq |
3011d 13h |
/xulalx25soc/trunk/rtl/ |
| 45 |
Minor cosmetic change, eliminates a warning in Xilinx's XISE but offers no
functional difference. |
dgisselq |
3015d 09h |
/xulalx25soc/trunk/rtl/ |
| 44 |
NELM parameter adjusted to reflect the maximum number of lines the compressed
scope can handle: 31, not 32. |
dgisselq |
3015d 09h |
/xulalx25soc/trunk/rtl/ |
| 43 |
Commentary changes only, no substance. |
dgisselq |
3015d 09h |
/xulalx25soc/trunk/rtl/ |
| 39 |
An attempt at a bugfix. We'll see if this works any better downstream. |
dgisselq |
3018d 16h |
/xulalx25soc/trunk/rtl/ |
