| Rev |
Log message |
Author |
Age |
Path |
| 105 |
Mostly cosmetic changes. The Makefile now builds a couple more programs,
the documentation is better, etc. |
dgisselq |
2903d 04h |
/xulalx25soc/trunk/sw/ |
| 104 |
Updates to the flash driver drawn from the S6SoC project. |
dgisselq |
2903d 04h |
/xulalx25soc/trunk/sw/ |
| 103 |
Added a SDSPI scope, and defined which of the four scopes it points to.
(It uses the configuration scopes position, if the configuration scope isn't
defined.) |
dgisselq |
2903d 04h |
/xulalx25soc/trunk/sw/ |
| 93 |
Oops -- missed adjusting the copyright. |
dgisselq |
2926d 08h |
/xulalx25soc/trunk/sw/ |
| 92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
2926d 08h |
/xulalx25soc/trunk/sw/ |
| 91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
2926d 08h |
/xulalx25soc/trunk/sw/ |
| 78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
2932d 04h |
/xulalx25soc/trunk/sw/ |
| 77 |
Adds register names and values for the SD card interface. |
dgisselq |
2932d 04h |
/xulalx25soc/trunk/sw/ |
| 76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
2932d 04h |
/xulalx25soc/trunk/sw/ |
| 53 |
Added a touch of error checking. |
dgisselq |
2980d 05h |
/xulalx25soc/trunk/sw/ |
| 49 |
Added some documentation to make the read and write calls easier to understand. |
dgisselq |
3008d 07h |
/xulalx25soc/trunk/sw/ |
| 46 |
This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles. |
dgisselq |
3010d 08h |
/xulalx25soc/trunk/sw/ |
| 42 |
Minor changes. |
dgisselq |
3014d 04h |
/xulalx25soc/trunk/sw/ |
| 41 |
Bug fix. This was preventing dumpsdram from accurately reading back what
had been written to the RAM earlier. |
dgisselq |
3014d 04h |
/xulalx25soc/trunk/sw/ |
| 40 |
This adds to dumpsdram the capability to run over a port, such as with
busmaster_tb. |
dgisselq |
3015d 15h |
/xulalx25soc/trunk/sw/ |
| 38 |
Updated to remove the build dependence upon ZipCPU. |
dgisselq |
3017d 14h |
/xulalx25soc/trunk/sw/ |
| 33 |
Oops -- the audio was wired audio first then the interrupt controller, not
the other way around. This adjusts regdefs to match what's on the chip. |
dgisselq |
3022d 07h |
/xulalx25soc/trunk/sw/ |
| 31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3022d 07h |
/xulalx25soc/trunk/sw/ |
| 30 |
Bug fixes. In particular, this fixes a segmentation violation. |
dgisselq |
3022d 11h |
/xulalx25soc/trunk/sw/ |
| 29 |
This adds a vastly updated and superious ziprun capability to the repository.
ziprun now accepts ELF program files *only*, reads them, and places them onto
the board. This includes the ability, within the ELF file, of specifying
whether or not the data is sent to block ram, SD ram, or Flash, as well as
the ability of specifying the initial address. (Of course, that's a one time
thing--to always have the same initial address, set the address in
rtl/busmaster.v) |
dgisselq |
3023d 03h |
/xulalx25soc/trunk/sw/ |
| 28 |
Oops--two files needed by zipdbg weren't originally placed in the directory. |
dgisselq |
3023d 08h |
/xulalx25soc/trunk/sw/ |
| 25 |
Fixing compile time warnings. |
dgisselq |
3023d 08h |
/xulalx25soc/trunk/sw/ |
| 24 |
Added the #define necessary to enable (and clear) SCOPE interrupts. |
dgisselq |
3029d 06h |
/xulalx25soc/trunk/sw/ |
| 17 |
Some basic updates, to include adding in a missing file (zipstate). Most of
these updates include making sure that the XuLA2 device can be accessed via
the USB. (Prior versions accessed the FPGA via serial port or network ...) |
dgisselq |
3088d 08h |
/xulalx25soc/trunk/sw/ |
| 13 |
This version is now working. (It probably would've worked before, but
everything is now working.) |
dgisselq |
3090d 03h |
/xulalx25soc/trunk/sw/ |
| 11 |
Getting software up and running on the board for the first time. (Not there
yet, but I think these items have now proven themselves.) |
dgisselq |
3090d 06h |
/xulalx25soc/trunk/sw/ |
| 7 |
Mostly minor changes. Fixed the legal copyright statement in the UART files,
adjusted some comments, and made sure that the zipdbg program contained all
the latest features from our Vault. |
dgisselq |
3092d 16h |
/xulalx25soc/trunk/sw/ |
| 5 |
Initial software version, in support of the project. At this point, they are
provided with no guarantees that they work. (They did use to work--on an older
build, but I haven't been able to verify that they work with this newer build
yet.) |
dgisselq |
3093d 02h |
/xulalx25soc/trunk/sw/ |
