OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] - Rev 30

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
30 Fixed some typos in document nuubik 5946d 01h /
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 5946d 01h /
28 Quartus project files for HW code 5 project files nuubik 5947d 02h /
27 Initial commit of post code logger block and fifo used in the logger nuubik 5947d 02h /
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed
nuubik 5947d 02h /
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0
nuubik 5947d 02h /
24 Added changes for new dongle HW code 5 features nuubik 5947d 02h /
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes
nuubik 5947d 02h /
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5947d 02h /
21 This commit was manufactured by cvs2svn to create tag 'version_1_4'. 5960d 05h /
20 Fix'ed TAR cycle second part this is not critical update nuubik 5960d 05h /
19 Fix'ed cycle type init code copy/pase mistake nuubik 5960d 07h /
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5961d 06h /
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5961d 07h /
16 Synchronisation with OpenCores release nuubik 6094d 03h /
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6211d 06h /
14 added comment on POR time influence when booting from LPC dongle nuubik 6223d 05h /
13 This commit was manufactured by cvs2svn to create tag 'SoftVersion_1_1'. 6324d 23h /
12 Added windows py bindings check with nice info print with link to installer nuubik 6324d 23h /
11 one ; in line end possible runtime error nuubik 6324d 23h /
10 fixed a typo nuubik 6328d 21h /
9 Made failing on port open retry nuubik 6328d 21h /
8 Added PCB level test options nuubik 6329d 04h /
7 Fixed pin modes and resyntesized nuubik 6329d 04h /
6 Fixed Cyclon part no in datasheets and drawings nuubik 6366d 02h /
5 This commit was manufactured by cvs2svn to create tag 'HWVersion_1_0'. 6391d 21h /
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6391d 21h /
3 Changed outputs to LVCMOS and lowered drive current to 2mA to avoid noise on longer tracs and fast switching speeds nuubik 6391d 21h /
2 Initial global code commit nuubik 6406d 05h /
1 Standard project directories initialized by cvs2svn. 6406d 05h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.