Rev |
Log message |
Author |
Age |
Path |
49 |
Added some documentation to make the read and write calls easier to understand. |
dgisselq |
2991d 04h |
/ |
48 |
Cleaned up the documentation a touch. It no longer reads like the bugs I used
to debug are still being debugged ... |
dgisselq |
2993d 05h |
/ |
47 |
Fixes the "NAN" clocks/second output, as well as making input timing come closer
to a realistic timing. (I actually don't know what timing the JTAG port is
providing, but ... the new timer is closer.) |
dgisselq |
2993d 05h |
/ |
46 |
This is a bug fix release--fixing the bug that kept dumpsdram.cpp/wbsdram.v
from working when long pipelined reads were interrupted by the necessity of
a pair of refresh cycles. |
dgisselq |
2993d 06h |
/ |
45 |
Minor cosmetic change, eliminates a warning in Xilinx's XISE but offers no
functional difference. |
dgisselq |
2997d 01h |
/ |
44 |
NELM parameter adjusted to reflect the maximum number of lines the compressed
scope can handle: 31, not 32. |
dgisselq |
2997d 01h |
/ |
43 |
Commentary changes only, no substance. |
dgisselq |
2997d 01h |
/ |
42 |
Minor changes. |
dgisselq |
2997d 01h |
/ |
41 |
Bug fix. This was preventing dumpsdram from accurately reading back what
had been written to the RAM earlier. |
dgisselq |
2997d 01h |
/ |
40 |
This adds to dumpsdram the capability to run over a port, such as with
busmaster_tb. |
dgisselq |
2998d 12h |
/ |
39 |
An attempt at a bugfix. We'll see if this works any better downstream. |
dgisselq |
3000d 08h |
/ |
38 |
Updated to remove the build dependence upon ZipCPU. |
dgisselq |
3000d 11h |
/ |
37 |
These fixes were necessary to get the SDRAM into a working simulation
capability. It is finally what it was supposed to be: cycle accurate. Sadly,
to do this, I did need to make a subtle change to rtl/wbsdram.v. (I was having
a problem with external input clocking in Verilator. This fixes it--but its
a Verilator only change--to rtl/wbsdram.v that is.) |
dgisselq |
3001d 05h |
/ |
36 |
A linker script, appropriate to the XuLA25-LX25 SoC. |
dgisselq |
3001d 07h |
/ |
35 |
Updates the memory testing program to work successfully with the Gnu build
tools--particularly the GNU C-preprocessor from GCC and the GNU assembler from
Binutils. |
dgisselq |
3001d 07h |
/ |
34 |
Bug fix: This sets as a positive voltage bias (not negative) the maximum
value of 0x07fff, where as the negative maximum value of 0x08000 properly
(now) reflects nearly ground--as one would desire. (Last time around I had
these backwards.) |
dgisselq |
3005d 02h |
/ |
33 |
Oops -- the audio was wired audio first then the interrupt controller, not
the other way around. This adjusts regdefs to match what's on the chip. |
dgisselq |
3005d 04h |
/ |
32 |
Just noticed that the timer was fixed on this. This change adjusts the
timer to support audio at a user selectable rate. |
dgisselq |
3005d 04h |
/ |
31 |
A bug fix, although one that rearranges the bus. The first four I/O locations
have been adjusted. The new locations are reflected in wishbone.html. In
addition, the PWM and UART devices no longer create bus errors when accessed.
Finally, this version uses a `define XULA25 to determine whether or not to build
for the XuLA2-LX9 or the XuLA2-LX25. If defined, it will build for the
XuLA2-LX25. If not, for the XuLA2-LX9. The ideal location for this define
would be to place it into your Xilinx configuration, should you wish to build
for the LX25. |
dgisselq |
3005d 04h |
/ |
30 |
Bug fixes. In particular, this fixes a segmentation violation. |
dgisselq |
3005d 09h |
/ |
29 |
This adds a vastly updated and superious ziprun capability to the repository.
ziprun now accepts ELF program files *only*, reads them, and places them onto
the board. This includes the ability, within the ELF file, of specifying
whether or not the data is sent to block ram, SD ram, or Flash, as well as
the ability of specifying the initial address. (Of course, that's a one time
thing--to always have the same initial address, set the address in
rtl/busmaster.v) |
dgisselq |
3006d 01h |
/ |
28 |
Oops--two files needed by zipdbg weren't originally placed in the directory. |
dgisselq |
3006d 05h |
/ |
27 |
Bug fix: the last_state register now correctly reflects all 5-bits of the state
machine. (Useful when detecting lockups ...) |
dgisselq |
3006d 05h |
/ |
26 |
Some bug fixes, and the long jump early branching integration. |
dgisselq |
3006d 05h |
/ |
25 |
Fixing compile time warnings. |
dgisselq |
3006d 05h |
/ |
24 |
Added the #define necessary to enable (and clear) SCOPE interrupts. |
dgisselq |
3012d 03h |
/ |
23 |
This fixes a bug in the early branching system, and clarifies that early
branch instructions will not affect the flags. It's a basic bug fix update. |
dgisselq |
3014d 15h |
/ |
22 |
Added the mkdatev.pl file. (Oops!) |
dgisselq |
3017d 07h |
/ |
21 |
Files, not links, to replace what were once broken links in this project. |
dgisselq |
3067d 14h |
/ |
20 |
Documents, borrowed from their source projects, and reproduced here. These
describe the various components of the board. |
dgisselq |
3067d 14h |
/ |