OpenCores
URL https://opencores.org/ocsvn/fade_ether_protocol/fade_ether_protocol/trunk

Subversion Repositories fade_ether_protocol

[/] [fade_ether_protocol/] [trunk/] [stable_jumbo_frames_version/] - Rev 49

Rev

Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
28 Correction of an obvious mistake in the Linux driver, which lead to deadlock
when two applications (or two threads) tried to open the same FADE device.		 wzab 3459d 10h /fade_ether_protocol/trunk/stable_jumbo_frames_version
27 Added file fade_one_channel, allowing to implement multiple FADE instances in a single FPGA. wzab 3473d 18h /fade_ether_protocol/trunk/stable_jumbo_frames_version
26 Corrected small bug in CRC update in eth_sender8,vhd
Added counter of retransmitted packets.
Some minor changes in delay update parameters.		 wzab 3508d 05h /fade_ether_protocol/trunk/stable_jumbo_frames_version
25 Modified the Tcl script for KC705 so, that it automatically runs synthesis, implementation and generates bitstream. wzab 3531d 19h /fade_ether_protocol/trunk/stable_jumbo_frames_version
24 Added build scripts for KC705 (somehow they got omitted in version 22) wzab 3532d 08h /fade_ether_protocol/trunk/stable_jumbo_frames_version
23 Added script allowing for batch compilation of FADE 10G for Atlys.
Just run build_proj_atlys.sh

Removed compilation of receiver2.c (which has been deleted) in the Makefile.
Slightly changed order of operation in the receiver2t.c		 wzab 3532d 08h /fade_ether_protocol/trunk/stable_jumbo_frames_version
22 Sources reorganized so, that each ".xci" is in a separate directory.
Added script for rebuilding of Vivado project for KC705.
Just run the build_proj_kc705 script, and the project
will be created as kc705_10g3.xpr in the kc705_10g3 drirectory.
You can open it later on in Vivado 2014.3 and build the bitstream.		 wzab 3532d 09h /fade_ether_protocol/trunk/stable_jumbo_frames_version
21 Changed the top entity for KC705, so that the FADE core is correctly reset
by the RESETMAC command.
Changed sending of the FCMD_RESET command form driver to the FPGA (as it
is not confirmed - the reinitialized core can't confirm the command).
Changed the receiver2t demo program so that it sends RESETMAC three times
before the transmission is started.

In the future, probably there should be a STATUS ioctl, which would
verify, that the core has been reset by RESETMAC.
Then the program should send RESETMAC, and afterwards read the STATUS,
verifying, that RESETMAC arrived FPGA. If not it should repeat the
above procedure (not implemented yet).		 wzab 3532d 16h /fade_ether_protocol/trunk/stable_jumbo_frames_version
20 Cured problem with dta_eod missed, when buffer was full at the moment
when dta_eod was asserted.
It caused the client program to hang, as no end of data was transmitted
and no new data arrived...		 wzab 3533d 07h /fade_ether_protocol/trunk/stable_jumbo_frames_version
19 The send_cmd function protected to attempt to call it if the Ethernet device was not
claimed before (previously it caused a problem with NULL pointer dereference
in the ioctl in kernel code).

Moved the Ethernet device name to a macro, so it is easier to modify it, when
someone tests in different machines (e.g. the 10Gb/s NIC for tests with
KC705 is p4p1, while 1Gb/s NIC for tests with Atlys is eth0)		 wzab 3533d 09h /fade_ether_protocol/trunk/stable_jumbo_frames_version

< Prev 1 2

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.