Rev |
Log message |
Author |
Age |
Path |
197 |
Fixed incorrect comments |
jshamlet |
1620d 20h |
/open8_urisc/trunk/VHDL/ |
196 |
Modified the update logic to allow direct writes to offset 0xFE for refreshing the clock status. This way, any write to the clock status register will immediately be undone. (Writing 0x00 to offset 0xFF is once-more ignored) |
jshamlet |
1620d 20h |
/open8_urisc/trunk/VHDL/ |
195 |
Added dual-port RAM core for SDLC interface. |
jshamlet |
1621d 15h |
/open8_urisc/trunk/VHDL/ |
194 |
Cleaned up licensing sections |
jshamlet |
1621d 15h |
/open8_urisc/trunk/VHDL/ |
193 |
Fixed incorrect comment in o8_alu16.vhd. The value of the write to 0x1F doesn't matter, as the write itself triggers the calculation. |
jshamlet |
1621d 16h |
/open8_urisc/trunk/VHDL/ |
192 |
Added SDLC packet engine |
jshamlet |
1621d 16h |
/open8_urisc/trunk/VHDL/ |
191 |
Cleaned up comments, added back the OPEN8_NULLBUS constant, and added some new modules for ADCs and LCD displays.
Also made the button input module more configurable by moving the debounce code to a separate entity and using generics to instantiate it. |
jshamlet |
1621d 16h |
/open8_urisc/trunk/VHDL/ |
190 |
Fixed a bug in CPU where RTI/RTS wasn't idling the instruction cache, causing intermittent failures where RTI would execute as RTS, corrupting the stack;
Fixed a bug in the real-time clock where the uSec tick generator would stop if the PIT timer value was left/set to 0x00. |
jshamlet |
1633d 13h |
/open8_urisc/trunk/VHDL/ |
189 |
Merged changes from private repository,
added ceil_log2 function to Open8_pkg, since it is used to calculate RAM vectors,
cleaned up comments and removed local copies of the ceil_log2 function from peripherals. |
jshamlet |
1634d 14h |
/open8_urisc/trunk/VHDL/ |
188 |
Added a generic to alter the behavior of RTI so that it can optionally skip restoring the general purpose flags GP4 to GP7, allowing ISR's to make persistent changes to them. Also exported these flags to the top level for use outside the CPU. |
jshamlet |
1634d 17h |
/open8_urisc/trunk/VHDL/ |
187 |
Added the CPU_Halt input, only now as an input to the instruction decoder. The CPU_Halt line will assert the registered CPU_Halt_Req, which will cause the instruction decoder to abort the current instruction, reset the PC, then enter a hold state until the line is deasserted. Additionally, a very minor bug that could cause the SMSK instruction to effectively execute twice if interrupted was fixed. Lastly, cleaned up the comments even more. |
jshamlet |
1636d 13h |
/open8_urisc/trunk/VHDL/ |
186 |
Merged the interrupt override logic into the case structure, simplifying how interrupts are processed. |
jshamlet |
1639d 13h |
/open8_urisc/trunk/VHDL/ |
185 |
1) Fixed an apparently long-standing bug where the interrupt bit wasn't being cleared after an RTI
2) Modified the program counter logic to be simpler. It now always increments, and states control the increment using the offset field. A new set of constants was added to replace the old states.
3) Modified the ALU to always use Operand1 instead of ALU_Ctrl.Data (and removed the field in the record). A new ALU command, ALU_GMSK, was added, as it was the only instruction to set the .Data field to something other than Operand1 (Int_Mask)
4) Modified the package file so that flag names match what the assembler calls them. FL_Z is now PSR_Z, FL_GP1 is now PSR_GP4, etc.
5) Cleaned up the comments and code formatting |
jshamlet |
1639d 15h |
/open8_urisc/trunk/VHDL/ |
184 |
More file/entity renaming to match private versions. |
jshamlet |
1641d 15h |
/open8_urisc/trunk/VHDL/ |
183 |
Renamed core to o8_cpu to match new naming scheme |
jshamlet |
1641d 16h |
/open8_urisc/trunk/VHDL/ |
182 |
Simplified the address generation logic at the expense of making LDX take one additional clock cycle. This allowed the address logic to be split out of the main state machine and simplified (greatly). During this process, a bug in SDO was found and fixed that caused it to return through the wrong pipe fill state wnen auto increment was disabled. |
jshamlet |
1641d 16h |
/open8_urisc/trunk/VHDL/ |
181 |
Altered the RSP instruction to allow the stack pointed to either be restored from registers or stored to registers based on the status of a processor bit. Also modified LDX to simplify the address logic. |
jshamlet |
1642d 12h |
/open8_urisc/trunk/VHDL/ |
180 |
Added additional Open8 compatible modules |
jshamlet |
1646d 16h |
/open8_urisc/trunk/VHDL/ |
177 |
Fixed comments in RTC module |
jshamlet |
2966d 16h |
/open8_urisc/trunk/VHDL/ |
176 |
Fixed documentation errors,
Modified uSec_Tick such that it is always generated regardless of the interval. |
jshamlet |
2971d 14h |
/open8_urisc/trunk/VHDL/ |