OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk/] - Rev 35

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 5978d 10h /usb_dongle_fpga/trunk/
34 For download of v5 dongle tool and manual nuubik 5980d 11h /usb_dongle_fpga/trunk/
33 For download of v5 web release nuubik 5980d 12h /usb_dongle_fpga/trunk/
32 For download of v5 datasheet nuubik 5980d 12h /usb_dongle_fpga/trunk/
31 Newest available schematic nuubik 5981d 05h /usb_dongle_fpga/trunk/
30 Fixed some typos in document nuubik 5981d 05h /usb_dongle_fpga/trunk/
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 5981d 05h /usb_dongle_fpga/trunk/
28 Quartus project files for HW code 5 project files nuubik 5982d 05h /usb_dongle_fpga/trunk/
27 Initial commit of post code logger block and fifo used in the logger nuubik 5982d 05h /usb_dongle_fpga/trunk/
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5982d 05h /usb_dongle_fpga/trunk/
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5982d 05h /usb_dongle_fpga/trunk/
24 Added changes for new dongle HW code 5 features nuubik 5982d 05h /usb_dongle_fpga/trunk/
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5982d 06h /usb_dongle_fpga/trunk/
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5982d 06h /usb_dongle_fpga/trunk/
20 Fix'ed TAR cycle second part this is not critical update nuubik 5995d 08h /usb_dongle_fpga/trunk/
19 Fix'ed cycle type init code copy/pase mistake nuubik 5995d 10h /usb_dongle_fpga/trunk/
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5996d 09h /usb_dongle_fpga/trunk/
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5996d 10h /usb_dongle_fpga/trunk/
16 Synchronisation with OpenCores release nuubik 6129d 07h /usb_dongle_fpga/trunk/
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6246d 09h /usb_dongle_fpga/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.