Rev |
Log message |
Author |
Age |
Path |
271 |
Removed deleted generic define. |
jshamlet |
1340d 20h |
/ |
270 |
Moved CPU internal constants to o8_cpu.vhd and replace the generic that set the RSP direction flag with a constant instead. This removes the need to expose internal architectural flags externally.
Also added a hard-coded version register that takes a major and minor value as bytes using generics. This is a read-only register to the CPU. |
jshamlet |
1340d 21h |
/ |
269 |
Modified the write data path to use separate enumerated states rather than reuse the .reg field to improve performance. |
jshamlet |
1343d 10h |
/ |
268 |
Added a 16-input external interrupt manager and dedicated SPI tx-only transmitter (for use with DACs, etc.). Also updated the soft-DACs with cleaned up HDL. |
jshamlet |
1343d 11h |
/ |
267 |
Corrected the file description to indicate this is an example package. |
jshamlet |
1343d 11h |
/ |
266 |
Accidentally uploaded incorrect example file for Open8_cfg.vhd |
jshamlet |
1343d 11h |
/ |
265 |
Fixed a bug where "reg" wasn't being initialized with Poly_Init at reset. |
jshamlet |
1435d 19h |
/ |
264 |
Updated comments |
jshamlet |
1445d 17h |
/ |
263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1445d 17h |
/ |
262 |
Added comments to LCD controllers - specifically that reading either register 0 or 1 will return the ready status. This code was already present, but not mentioned in the register map. |
jshamlet |
1454d 20h |
/ |
261 |
Increased delay timer to 7 bits for button press detection. |
jshamlet |
1461d 20h |
/ |
260 |
Added missing comments for Sequential_Interrupts generic, as well as comments explaining portions of the CPU operations. |
jshamlet |
1474d 19h |
/ |
259 |
Fixed issue where Write_Fault wasn't defaulting to '0' when Write_Protect was set to FALSE,
Added a pulse interval measurement entity,
Fixed comments. |
jshamlet |
1474d 21h |
/ |
258 |
Fixed write bug in o8_ltc2355_2p.vhd, added a newer Open8_cfg.vhd, and the sys_tick.vhd utility entity. |
jshamlet |
1475d 19h |
/ |
257 |
Fixed misnamed signal in o8_7seg.vhd and added a replacement switch interface that handles both static and pushbutton switches. |
jshamlet |
1475d 19h |
/ |
256 |
Removed unused generic from the status_led.vhd and cleaned up comments on the CPU |
jshamlet |
1475d 20h |
/ |
255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1476d 01h |
/ |
254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1476d 16h |
/ |
253 |
Fixed spelling error in comment |
jshamlet |
1476d 16h |
/ |
252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1476d 16h |
/ |