URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_13/] [rtl/] [verilog/] - Rev 350

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
338		root	5496d 18h	/ethmac/tags/rel_13/rtl/verilog
335	New directory structure.	root	5553d 23h	/ethmac/tags/rel_13/rtl/verilog
265	This commit was manufactured by cvs2svn to create tag 'rel_13'.		7852d 20h	/ethmac/tags/rel_13/rtl/verilog
264	Registers RxStatusWrite_rck and RxStatusWriteLatched were not used anywhere. Removed.	mohor	7852d 20h	/ethmac/tags/rel_13/rtl/verilog
261	Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort synchronized.	mohor	7853d 08h	/ethmac/tags/rel_13/rtl/verilog
259	In loopback rx_clk is not looped back. Possible CRC error. Consider if usage of additional logic is necessery (FIFO for looping the data).	mohor	7854d 09h	/ethmac/tags/rel_13/rtl/verilog
257	When TxUsedData and CtrlMux occur at the same time, byte counter needs to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.	mohor	7854d 09h	/ethmac/tags/rel_13/rtl/verilog
256	TxDone and TxAbort changed so they're not propagated to the wishbone module when control frame is transmitted.	mohor	7854d 09h	/ethmac/tags/rel_13/rtl/verilog
255	TPauseRq synchronized to tx_clk.	mohor	7854d 09h	/ethmac/tags/rel_13/rtl/verilog
253	r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead.	mohor	7855d 15h	/ethmac/tags/rel_13/rtl/verilog
251	When control frame (PAUSE) was sent, status was written in the eth_wishbone module and both TXB and TXC interrupts were set. Fixed. Only TXC interrupt is set.	mohor	7855d 16h	/ethmac/tags/rel_13/rtl/verilog
250	AddressMiss status is connecting to the Rx BD. AddressMiss is identifying that a frame was received because of the promiscous mode.	mohor	7855d 16h	/ethmac/tags/rel_13/rtl/verilog
248	wb_rst_i is used for MIIM reset.	mohor	7856d 16h	/ethmac/tags/rel_13/rtl/verilog
246	Since r_Rst bit is not used any more, default value is changed to 0xa000.	mohor	7859d 19h	/ethmac/tags/rel_13/rtl/verilog
244	r_Rst signal does not reset any module any more and is removed from the design.	mohor	7860d 15h	/ethmac/tags/rel_13/rtl/verilog
242	Late collision is reported only when not in the full duplex. Sample is taken (for status) as soon as MRxDV is not valid (regardless of the received byte cnt).	tadejm	7861d 11h	/ethmac/tags/rel_13/rtl/verilog
241	StartIdle state changed (not important the size of the packet). StartData1 activates only while ByteCnt is smaller than the MaxFrame.	tadejm	7861d 11h	/ethmac/tags/rel_13/rtl/verilog
240	All modules are reset with wb_rst instead of the r_Rst. Exception is MII module.	tadejm	7861d 11h	/ethmac/tags/rel_13/rtl/verilog
239	RxError is not generated when small frame reception is enabled and small frames are received.	tadejm	7861d 11h	/ethmac/tags/rel_13/rtl/verilog
238	Defines fixed to use generic RAM by default.	mohor	7873d 15h	/ethmac/tags/rel_13/rtl/verilog

1 2 Next >

Show All

Browse

Tools

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_13/] [rtl/] [verilog/] - Rev 350

Filtering Options