OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] - Rev 43

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
43 Cleaned up the CPU memory documentation. dgisselq 2782d 05h /openarty
42 Fixed up the CPU so that it passes a multiply test bench, in addition to the
CPU test.		 dgisselq 2782d 05h /openarty
41 Added the CPU test program to the Arty distribution. This works. dgisselq 2782d 05h /openarty
40 Fixed a problem with the declaration of variables to be volatile. dgisselq 2782d 05h /openarty
39 Fixes the OLED test so that it runs using the DMA. dgisselq 2782d 05h /openarty
38 ZipLoad can now load programs to non-reset locations. dgisselq 2782d 05h /openarty
37 Updated documentation and copyright. dgisselq 2782d 05h /openarty
36 Lots of changes, see the git changelog for details. dgisselq 2788d 14h /openarty
35 Added comments and copyright notice. dgisselq 2792d 02h /openarty
34 These updates bring the distribution along to the point where both the GPS
clock subsecond tracking, as well as the OLEDrgb controller now work.		 dgisselq 2792d 04h /openarty
33 Fixed the network receive CRC and MAC checking, and added ip-checking and
minimum packet length checking to the receiver.		 dgisselq 2797d 10h /openarty
32 Brought the CPU to its first working version, to include demo. dgisselq 2798d 13h /openarty
31 Initial network is now working. Adding CPU control files to repository. dgisselq 2799d 05h /openarty
30 Network transmit and MIG memory both work now, though the clock speed has
been dropped to 80.125MHz.		 dgisselq 2799d 05h /openarty
29 Here's the memory pin list, necessary for running Xilinx's Memory Interface
Generator.		 dgisselq 2827d 02h /openarty
28 Including the updates and corrections from the wbuart32 project. dgisselq 2827d 02h /openarty
27 Bus changes ... dgisselq 2827d 02h /openarty
26 Adjusted the timing comments. dgisselq 2827d 02h /openarty
25 The memory now works. However, the core speed has been lowered to 81.25MHz
to do this. The top level file is no longer fasttop.v, but toplevel.v.		 dgisselq 2835d 10h /openarty
24 Here are the updates from the first (failed) attempt to try to integrate
the DDR3 SDRAM controller onto this board.		 dgisselq 2854d 06h /openarty

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.