OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [tags/] [version_1_5/] - Rev 25

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5972d 16h /usb_dongle_fpga/tags/version_1_5
24 Added changes for new dongle HW code 5 features nuubik 5972d 16h /usb_dongle_fpga/tags/version_1_5
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5972d 16h /usb_dongle_fpga/tags/version_1_5
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5972d 16h /usb_dongle_fpga/tags/version_1_5
20 Fix'ed TAR cycle second part this is not critical update nuubik 5985d 18h /usb_dongle_fpga/tags/version_1_5
19 Fix'ed cycle type init code copy/pase mistake nuubik 5985d 20h /usb_dongle_fpga/tags/version_1_5
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5986d 19h /usb_dongle_fpga/tags/version_1_5
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5986d 20h /usb_dongle_fpga/tags/version_1_5
16 Synchronisation with OpenCores release nuubik 6119d 17h /usb_dongle_fpga/tags/version_1_5
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6236d 19h /usb_dongle_fpga/tags/version_1_5
14 added comment on POR time influence when booting from LPC dongle nuubik 6248d 19h /usb_dongle_fpga/tags/version_1_5
12 Added windows py bindings check with nice info print with link to installer nuubik 6350d 12h /usb_dongle_fpga/tags/version_1_5
11 one ; in line end possible runtime error nuubik 6350d 12h /usb_dongle_fpga/tags/version_1_5
10 fixed a typo nuubik 6354d 10h /usb_dongle_fpga/tags/version_1_5
9 Made failing on port open retry nuubik 6354d 10h /usb_dongle_fpga/tags/version_1_5
8 Added PCB level test options nuubik 6354d 18h /usb_dongle_fpga/tags/version_1_5
7 Fixed pin modes and resyntesized nuubik 6354d 18h /usb_dongle_fpga/tags/version_1_5
6 Fixed Cyclon part no in datasheets and drawings nuubik 6391d 15h /usb_dongle_fpga/tags/version_1_5
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6417d 11h /usb_dongle_fpga/tags/version_1_5
3 Changed outputs to LVCMOS and lowered drive current to 2mA to avoid noise on longer tracs and fast switching speeds nuubik 6417d 11h /usb_dongle_fpga/tags/version_1_5

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.