OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [tags/] [version_1_5/] - Rev 35

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 6009d 18h /usb_dongle_fpga/tags/version_1_5
34 For download of v5 dongle tool and manual nuubik 6011d 19h /usb_dongle_fpga/tags/version_1_5
33 For download of v5 web release nuubik 6011d 20h /usb_dongle_fpga/tags/version_1_5
32 For download of v5 datasheet nuubik 6011d 20h /usb_dongle_fpga/tags/version_1_5
31 Newest available schematic nuubik 6012d 13h /usb_dongle_fpga/tags/version_1_5
30 Fixed some typos in document nuubik 6012d 13h /usb_dongle_fpga/tags/version_1_5
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 6012d 13h /usb_dongle_fpga/tags/version_1_5
28 Quartus project files for HW code 5 project files nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
27 Initial commit of post code logger block and fifo used in the logger nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
24 Added changes for new dongle HW code 5 features nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 6013d 14h /usb_dongle_fpga/tags/version_1_5
20 Fix'ed TAR cycle second part this is not critical update nuubik 6026d 17h /usb_dongle_fpga/tags/version_1_5
19 Fix'ed cycle type init code copy/pase mistake nuubik 6026d 19h /usb_dongle_fpga/tags/version_1_5
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 6027d 18h /usb_dongle_fpga/tags/version_1_5
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 6027d 18h /usb_dongle_fpga/tags/version_1_5
16 Synchronisation with OpenCores release nuubik 6160d 15h /usb_dongle_fpga/tags/version_1_5
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6277d 18h /usb_dongle_fpga/tags/version_1_5

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.