OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk/] - Rev 26

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5997d 01h /usb_dongle_fpga/trunk
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5997d 01h /usb_dongle_fpga/trunk
24 Added changes for new dongle HW code 5 features nuubik 5997d 02h /usb_dongle_fpga/trunk
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5997d 02h /usb_dongle_fpga/trunk
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5997d 02h /usb_dongle_fpga/trunk
20 Fix'ed TAR cycle second part this is not critical update nuubik 6010d 04h /usb_dongle_fpga/trunk
19 Fix'ed cycle type init code copy/pase mistake nuubik 6010d 06h /usb_dongle_fpga/trunk
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 6011d 05h /usb_dongle_fpga/trunk
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 6011d 06h /usb_dongle_fpga/trunk
16 Synchronisation with OpenCores release nuubik 6144d 03h /usb_dongle_fpga/trunk
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6261d 05h /usb_dongle_fpga/trunk
14 added comment on POR time influence when booting from LPC dongle nuubik 6273d 05h /usb_dongle_fpga/trunk
12 Added windows py bindings check with nice info print with link to installer nuubik 6374d 22h /usb_dongle_fpga/trunk
11 one ; in line end possible runtime error nuubik 6374d 22h /usb_dongle_fpga/trunk
10 fixed a typo nuubik 6378d 20h /usb_dongle_fpga/trunk
9 Made failing on port open retry nuubik 6378d 20h /usb_dongle_fpga/trunk
8 Added PCB level test options nuubik 6379d 04h /usb_dongle_fpga/trunk
7 Fixed pin modes and resyntesized nuubik 6379d 04h /usb_dongle_fpga/trunk
6 Fixed Cyclon part no in datasheets and drawings nuubik 6416d 01h /usb_dongle_fpga/trunk
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6441d 21h /usb_dongle_fpga/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.