OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk] - Rev 37

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
37 Initial commit of EPCS1 (FPGA configuration memory) programmer to update dongle firmware nuubik 5993d 20h /usb_dongle_fpga/trunk
36 Initial commit of EPCS1 (FPGA configuration memory) programmet to update dongle firmware nuubik 5993d 20h /usb_dongle_fpga/trunk
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 5993d 20h /usb_dongle_fpga/trunk
34 For download of v5 dongle tool and manual nuubik 5995d 21h /usb_dongle_fpga/trunk
33 For download of v5 web release nuubik 5995d 22h /usb_dongle_fpga/trunk
32 For download of v5 datasheet nuubik 5995d 22h /usb_dongle_fpga/trunk
31 Newest available schematic nuubik 5996d 15h /usb_dongle_fpga/trunk
30 Fixed some typos in document nuubik 5996d 15h /usb_dongle_fpga/trunk
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 5996d 15h /usb_dongle_fpga/trunk
28 Quartus project files for HW code 5 project files nuubik 5997d 15h /usb_dongle_fpga/trunk
27 Initial commit of post code logger block and fifo used in the logger nuubik 5997d 16h /usb_dongle_fpga/trunk
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5997d 16h /usb_dongle_fpga/trunk
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5997d 16h /usb_dongle_fpga/trunk
24 Added changes for new dongle HW code 5 features nuubik 5997d 16h /usb_dongle_fpga/trunk
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5997d 16h /usb_dongle_fpga/trunk
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5997d 16h /usb_dongle_fpga/trunk
20 Fix'ed TAR cycle second part this is not critical update nuubik 6010d 18h /usb_dongle_fpga/trunk
19 Fix'ed cycle type init code copy/pase mistake nuubik 6010d 20h /usb_dongle_fpga/trunk
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 6011d 20h /usb_dongle_fpga/trunk
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 6011d 20h /usb_dongle_fpga/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.