Rev |
Log message |
Author |
Age |
Path |
108 |
Just to clarify expectations ... this makefile hardly builds anything. |
dgisselq |
3003d 17h |
/zipcpu |
107 |
Adding a missing file. |
dgisselq |
3004d 08h |
/zipcpu |
106 |
Updated to allow building without the sources for the graphics used in the
document. |
dgisselq |
3004d 11h |
/zipcpu |
105 |
Fixed some nasty early branching bugs. Adjusted the Makefile to declare that
cpudefs.h was automatically generated from cpudefs.v, and made sure that
zipbones included the cpudefs.v so it could get the DEBUG_SCOPE define.
In addition, the test.S was updated to test long jumps, the early branching
bug we found, and all three early branching instructions: ADD #x,PC, LOC(PC),PC,
and LDI #x,PC. |
dgisselq |
3009d 15h |
/zipcpu |
104 |
An updated build script, actually builds zip-gcc. |
dgisselq |
3010d 15h |
/zipcpu |
103 |
A barely functional, but somewhat working, version of GCC to check in.
If the Lord is willing, it should be accompanied by a newlib port soon.
That port should move the GCC status from barely functional but somewhat
working to functional and working, although not (yet) complete. |
dgisselq |
3010d 20h |
/zipcpu |
102 |
Updated bugfix version of the binutils patch, and a first patch of GCC.
The GCC patch is undergoing ongoing and active development. It is also known to
continue to contain active bugs. (It's not done yet.) |
dgisselq |
3013d 04h |
/zipcpu |
101 |
Adjusted the "BREAK" instruction so that it will now disassemble properly
with an operand. This was necessary to create a (trap_if ...) instruction
for the GCC compiler. |
dgisselq |
3015d 07h |
/zipcpu |
100 |
Some changes to support early branching: branches are now ADD #x,PC instructions
instead of MOV #x(PC),PC--providing greater range to the CPU. When that range
is insufficient, ZPARSER now recognizes long jump instructions coded as
LOD (PC),PC followed by the jump address. (This change was made necessary by
the need to build an assembler/linker that could create instructions that would
jump to any address in the 32-bit address space. In short, a part of the
ongoing GCC upgrade and rework.) |
dgisselq |
3015d 07h |
/zipcpu |
99 |
Added big-endian versus little-endian functionality. You can now specify which
your input file is as a command line parameter, and zdump will properly
disassemble the file. |
dgisselq |
3015d 07h |
/zipcpu |
98 |
Added justed longjump instructions from the previous (not used, broken)
functionality to the new LOD (PC),PC functionality. |
dgisselq |
3015d 07h |
/zipcpu |
97 |
Added longjump instructions. |
dgisselq |
3015d 07h |
/zipcpu |
96 |
Added the longjump functionality, so that the assembler will properly assemble
instructions to arbitrary 32-bit addresses. |
dgisselq |
3015d 07h |
/zipcpu |
95 |
Fixed a bug whereby a mistaken code for CLR was masking a valid LDI of a large
integer value. |
dgisselq |
3017d 13h |
/zipcpu |
94 |
These changes make it possible to build binutils-2.25/ here in this
directory. "make binutils" should be all that is necessary to build the
entire binutils package for the Zip CPU.
The default configure script, run from gas-script.sh below, will build and
install these utilities in an install/ subdirectory made below sw/. |
dgisselq |
3042d 10h |
/zipcpu |
93 |
A BINUTILS BACKEND IS NOW AVAILABLE!!!! |
dgisselq |
3050d 08h |
/zipcpu |
92 |
Adjustments made to match the simplified early branching. |
dgisselq |
3050d 08h |
/zipcpu |
91 |
Minor updates. |
dgisselq |
3050d 08h |
/zipcpu |
90 |
Removed MOV x(PC),PC from the list of possible early branching instructions.
ADD X,PC and LDI X,PC are now the only recognized early branching instructions.
This was done to spare logic, although I don't think I spared more than a
LUT or two. |
dgisselq |
3050d 08h |
/zipcpu |
89 |
Minor changes, to include making default branching an ADD.[condition] X,PC
instruction, rather than allowing both MOV X(PC),PC and ADD X,PC instructions.
Further zopcodes.cpp contains several bug fixes. |
dgisselq |
3050d 08h |
/zipcpu |