Rev |
Log message |
Author |
Age |
Path |
87 |
Added support for "When an Operand2 constant is used with the instructions MOVS, MVNS, ANDS, ORRS, ORNS, EORS, BICS, TEQ or TST, the carry flag is updated to bit[31] of the constant, if the constant is greater than 255 and can be produced by shifting an 8-bit value" to amber23 |
csantifort |
3442d 05h |
/ |
86 |
Fixed bug in amber 25 where a read was taken from user mode register in subervisor mode immediately following a ldm to user mode registers |
csantifort |
3455d 01h |
/ |
85 |
Fixed bug with accigning the mac address value |
csantifort |
3455d 08h |
/ |
84 |
Fixed some typos - no functional change |
csantifort |
3455d 08h |
/ |
83 |
Fixed bug with carry bit - now only use the carry bit as an input to specific instruments that use it - add with carry and subtract with carry |
csantifort |
3455d 09h |
/ |
82 |
Fixed overflag bug, ldmia user regs bug and status_bits_mode set on non-ececuting command bug |
csantifort |
3468d 20h |
/ |
81 |
Make the tcp functionality more like a normal sockets implementation. |
csantifort |
4132d 22h |
/ |
80 |
Enhanced boot-loader-ethmac to handle any number of telnet connections. |
csantifort |
4147d 01h |
/ |
79 |
Added msc flash file |
csantifort |
4147d 06h |
/ |
78 |
Added a serial debug port (using UART0) to boot-loader-ethmac |
csantifort |
4147d 08h |
/ |
77 |
Added new a23 source files to sim and synthesis source lists. |
csantifort |
4149d 04h |
/ |
76 |
Split the spec document into a processor core spec, and a user guide. |
csantifort |
4149d 04h |
/ |
75 |
Fixed scripts after renaming boot-loader to boot-loader-serial |
csantifort |
4155d 02h |
/ |
74 |
The patch implements barrel shifter using rotate as a main primitive.
The design was optimized for Altera Cyclone III FPGA and can be reused
with other FPGA vendors and products.
The patch integrates the FPGA-optimized barrel shifter into the
Amber 23 core when it is build for Altera FPGA.
The patch reduces footprint from 1178 to 339 LEs keeping Fmax at 57-60 MHz.
Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
csantifort |
4155d 03h |
/ |
73 |
The patch introduces a new configuration option `A23_RAM_REGISTER_BANK,
which controls instantiation of Amber 23 register bank.
If the option is set, a ram-based variant of the register bank is instantiated.
It can be useful in low-end FPGA designs, where flipflops and muxes are costly.
Altera Cyclone III resource utilization:
- flipflop-based register bank: 1583 combinationals + 856 registers
- ram-based register bank: 268 combinationals + 156 registers
Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
csantifort |
4155d 03h |
/ |
72 |
5 bit "OH_USR" constant was used when 2 bit "USR" should be used.
Both of the constants are 0.
The fault was introduced by ram-based register bank commit.
Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
csantifort |
4155d 03h |
/ |
71 |
Original Amber 23 core uses asyncronous implementation of register bank.
It leads to some problems with ram-based implementation of the register bank,
because at least Altera FPGAs uses syncronous ram blocks, so the whole address
needs to be latched.
The patch exposes non-registered versions of register select signals to the
register bank, so the bank can build address and latch it in the syncronous
ram input register.
The patch is a pre-requisite for ram-based register bank implementation on Altera FPGA.
Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
csantifort |
4155d 03h |
/ |
70 |
The mlas_bug testcase tried to use stack without setting stack pointer
register, causing unpredictable behavoiur.
The patch uses an expilict stack area for the test.
Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> |
csantifort |
4155d 03h |
/ |
69 |
Updated the spec for ISE 14.5, boot-loader-ethmac. |
csantifort |
4155d 03h |
/ |
68 |
Remove modelsim files. Only supporting Xilinx isim now. |
csantifort |
4155d 04h |
/ |