OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [asyst_3] - Rev 277

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7799d 17h /ethmac/tags/asyst_3
276 Defer indication changed. tadejm 7799d 18h /ethmac/tags/asyst_3
275 Fix MTxErr or prevent sending too big frames. mohor 7806d 22h /ethmac/tags/asyst_3
274 Backup version. Not fully working. tadejm 7807d 11h /ethmac/tags/asyst_3
272 When control packets were received, they were ignored in some cases. tadejm 7807d 17h /ethmac/tags/asyst_3
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7808d 19h /ethmac/tags/asyst_3
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7809d 19h /ethmac/tags/asyst_3
268 Release 1.19. Control frame description changed. mohor 7863d 12h /ethmac/tags/asyst_3
267 Full duplex control frames tested. mohor 7863d 15h /ethmac/tags/asyst_3
266 Flow control test almost finished. mohor 7868d 14h /ethmac/tags/asyst_3
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 7868d 18h /ethmac/tags/asyst_3
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 7869d 05h /ethmac/tags/asyst_3
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 7869d 05h /ethmac/tags/asyst_3
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 7869d 05h /ethmac/tags/asyst_3
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 7869d 17h /ethmac/tags/asyst_3
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 7870d 06h /ethmac/tags/asyst_3
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 7870d 07h /ethmac/tags/asyst_3
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 7870d 07h /ethmac/tags/asyst_3
255 TPauseRq synchronized to tx_clk. mohor 7870d 07h /ethmac/tags/asyst_3
254 Temp version. mohor 7871d 11h /ethmac/tags/asyst_3

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.