OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_macstatus.v] - Rev 276

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
276 Defer indication changed. tadejm 7808d 10h /ethmac/trunk/rtl/verilog/eth_macstatus.v
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 7877d 21h /ethmac/trunk/rtl/verilog/eth_macstatus.v
242 Late collision is reported only when not in the full duplex.
Sample is taken (for status) as soon as MRxDV is not valid (regardless
of the received byte cnt).
tadejm 7886d 01h /ethmac/trunk/rtl/verilog/eth_macstatus.v
168 CarrierSenseLost bug fixed when operating in full duplex mode. mohor 7948d 09h /ethmac/trunk/rtl/verilog/eth_macstatus.v
146 CarrierSenseLost status is not set when working in loopback mode. mohor 7956d 05h /ethmac/trunk/rtl/verilog/eth_macstatus.v
126 InvalidSymbol generation changed. mohor 7997d 05h /ethmac/trunk/rtl/verilog/eth_macstatus.v
101 Short frame and ReceivedLengthOK were not detected correctly. mohor 8091d 10h /ethmac/trunk/rtl/verilog/eth_macstatus.v
70 Small fixes. mohor 8154d 13h /ethmac/trunk/rtl/verilog/eth_macstatus.v
64 Status was not written correctly when frames were discarted because of
address mismatch.
mohor 8157d 06h /ethmac/trunk/rtl/verilog/eth_macstatus.v
43 Tx status is written back to the BD. mohor 8161d 14h /ethmac/trunk/rtl/verilog/eth_macstatus.v
42 Rx status is written back to the BD. mohor 8164d 07h /ethmac/trunk/rtl/verilog/eth_macstatus.v
37 Link in the header changed. mohor 8180d 13h /ethmac/trunk/rtl/verilog/eth_macstatus.v
22 eth_timescale.v changed to timescale.v This is done because of the
simulation of the few cores in a one joined project.
mohor 8276d 15h /ethmac/trunk/rtl/verilog/eth_macstatus.v
18 Few little NCSIM warnings fixed. mohor 8314d 09h /ethmac/trunk/rtl/verilog/eth_macstatus.v
15 A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
Include files fixed to contain no path.
File names and module names changed ta have a eth_ prologue in the name.
File eth_timescale.v is used to define timescale
All pin names on the top module are changed to contain _I, _O or _OE at the end.
Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
and Mdo_OE. The bidirectional signal must be created on the top level. This
is done due to the ASIC tools.
mohor 8350d 09h /ethmac/trunk/rtl/verilog/eth_macstatus.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.