Rev |
Log message |
Author |
Age |
Path |
16 |
Introduced inline functions simplifying reading and writing of packets' contents. |
wzab |
3542d 02h |
/fade_ether_protocol/trunk |
15 |
The previous experimental implemenation for 10Gb/s links has been replaced with the
new, rewritten implementation, which uses sequential numbering of packets instaed
of "sets of packets". This allowed to simplify the driver, and improve its performance.
Additionally a possibility to send user defined commands to the FPGA was added. |
wzab |
3549d 23h |
/fade_ether_protocol/trunk |
14 |
Removed small mistake causing a combinatorial loop. |
wzab |
3555d 01h |
/fade_ether_protocol/trunk |
13 |
Small correction in the kernel driver |
wzab |
3557d 07h |
/fade_ether_protocol/trunk |
12 |
Added experimental version of my protocol, working with the 10Gb/s
link on the KC705 board.
The design has been initially tested, and is working, but it still
needs some improvments.
Please note, that this version uses the "jumbo" frames,
with 8192 bytes of user data in each packet (plus header).
Therefore it was necessary to make some changes in the kernel
driver. |
wzab |
3564d 03h |
/fade_ether_protocol/trunk |
11 |
Corrected small bug in eth_sender8 (which in fact should only
generate a compiler warning, as the resulting bit vector
was anyway correctly truncated...) |
wzab |
3721d 01h |
/fade_ether_protocol/trunk |
10 |
Updated test client program - receiver2.c
Added possibility to activate only selected slave in the command line.
Currently program services up to three slaves: 0, 1 and 2
To activate a slave, add its number as a program argument in the command line
(order doesn't matter). |
wzab |
4020d 23h |
/fade_ether_protocol/trunk |
9 |
Corrected serious bug in acknowledged packed number calculations, which lead to transmission
errors in high speed CPUs. |
wzab |
4021d 23h |
/fade_ether_protocol/trunk |
8 |
Adjusted parameters of the NCA (network congestion avoidance) alogorithm
to obtain higher throughput. |
wzab |
4026d 00h |
/fade_ether_protocol/trunk |
7 |
Shortened synchronization path for tx_start signal in the eth_sender blocks |
wzab |
4026d 03h |
/fade_ether_protocol/trunk |
6 |
Further adjusted IFG lengths |
wzab |
4026d 10h |
/fade_ether_protocol/trunk |
5 |
Decreased length of the intraframe gaps (IFG)
In 100Mb/s version - to 100bits (25 nibbles)
In 1Gb/s version - to 104bits (13 bytes) |
wzab |
4027d 00h |
/fade_ether_protocol/trunk |
4 |
Added lacking files PCK_CRC32_D4.vhd and PCK_CRC32_D8.vhd |
wzab |
4053d 08h |
/fade_ether_protocol/trunk |
3 |
Added new version of the FPGA firmware, which does not rely on the Ethernet MAC core.
Now both versions are available.
The version with Ethernet MAC is in directory FPGA_with_MAC.
The version which handles directly Ethernet PHY is in directory FPGA_no_MAC |
wzab |
4053d 09h |
/fade_ether_protocol/trunk |
2 |
Initial submission of the implementation of the "fade" protocol. |
wzab |
4210d 02h |
/fade_ether_protocol/trunk |
1 |
The project and the structure was created |
root |
4210d 05h |
/fade_ether_protocol/trunk |