OpenCores
URL https://opencores.org/ocsvn/fade_ether_protocol/fade_ether_protocol/trunk

Subversion Repositories fade_ether_protocol

[/] [fade_ether_protocol] - Rev 16

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
16 Introduced inline functions simplifying reading and writing of packets' contents. wzab 3561d 04h /fade_ether_protocol
15 The previous experimental implemenation for 10Gb/s links has been replaced with the
new, rewritten implementation, which uses sequential numbering of packets instaed
of "sets of packets". This allowed to simplify the driver, and improve its performance.
Additionally a possibility to send user defined commands to the FPGA was added.
wzab 3569d 02h /fade_ether_protocol
14 Removed small mistake causing a combinatorial loop. wzab 3574d 03h /fade_ether_protocol
13 Small correction in the kernel driver wzab 3576d 09h /fade_ether_protocol
12 Added experimental version of my protocol, working with the 10Gb/s
link on the KC705 board.
The design has been initially tested, and is working, but it still
needs some improvments.
Please note, that this version uses the "jumbo" frames,
with 8192 bytes of user data in each packet (plus header).
Therefore it was necessary to make some changes in the kernel
driver.
wzab 3583d 05h /fade_ether_protocol
11 Corrected small bug in eth_sender8 (which in fact should only
generate a compiler warning, as the resulting bit vector
was anyway correctly truncated...)
wzab 3740d 03h /fade_ether_protocol
10 Updated test client program - receiver2.c

Added possibility to activate only selected slave in the command line.
Currently program services up to three slaves: 0, 1 and 2
To activate a slave, add its number as a program argument in the command line
(order doesn't matter).
wzab 4040d 01h /fade_ether_protocol
9 Corrected serious bug in acknowledged packed number calculations, which lead to transmission
errors in high speed CPUs.
wzab 4041d 01h /fade_ether_protocol
8 Adjusted parameters of the NCA (network congestion avoidance) alogorithm
to obtain higher throughput.
wzab 4045d 02h /fade_ether_protocol
7 Shortened synchronization path for tx_start signal in the eth_sender blocks wzab 4045d 05h /fade_ether_protocol
6 Further adjusted IFG lengths wzab 4045d 12h /fade_ether_protocol
5 Decreased length of the intraframe gaps (IFG)
In 100Mb/s version - to 100bits (25 nibbles)
In 1Gb/s version - to 104bits (13 bytes)
wzab 4046d 03h /fade_ether_protocol
4 Added lacking files PCK_CRC32_D4.vhd and PCK_CRC32_D8.vhd wzab 4072d 10h /fade_ether_protocol
3 Added new version of the FPGA firmware, which does not rely on the Ethernet MAC core.
Now both versions are available.
The version with Ethernet MAC is in directory FPGA_with_MAC.
The version which handles directly Ethernet PHY is in directory FPGA_no_MAC
wzab 4072d 11h /fade_ether_protocol
2 Initial submission of the implementation of the "fade" protocol. wzab 4229d 05h /fade_ether_protocol
1 The project and the structure was created root 4229d 07h /fade_ether_protocol

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.