| Rev |
Log message |
Author |
Age |
Path |
| 170 |
Changed all links to minsoc.com/dep/trunk/ to solve the issues caused by sourceforge.com. |
ConX. |
4360d 06h |
/minsoc/trunk/utils/setup |
| 168 |
Installation script has an option for advanced or resumed installation.
Advanced mode:
the script only downloads and installs the required tools. Dependency libraries and tools are checked during individual tool compilation. Furthermore, the install directory is not added to the system PATH. You have to do it yourself. Libusb, libftdi and Icarus Verilog are supposed to be installed by the user.
Resumed mode:
the script checks if the dependency libraries and tools are installed before doing anything. It also adds the installation directory to the system PATH variable for bash shells on HOME/.bashrc. Libusb, libftdi and Icarus Verilog are automatically installed for you.
Non standard configuration scripts that require or1200_defines.v to be tweaked will ask before doing so and backup the correspondent files. |
rfajardo |
4544d 09h |
/minsoc/trunk/utils/setup |
| 167 |
Ruben Diez fix to installation script problem in Windows:
minsoc-install.sh breaks if there are spaces in the PATH, which is rather common under Cygwin, as most Windows PCs have something like "C:\Program Files" in there. |
rfajardo |
4578d 12h |
/minsoc/trunk/utils/setup |
| 166 |
Turning on warnings for genera_bench.
Updating minsoc-install.sh to work better with directories and working around a missing inclusion of libftdi autotools. http://opencores.org/forum,OpenRISC,0,4685,1 |
rfajardo |
4592d 11h |
/minsoc/trunk/utils/setup |
| 161 |
Correcting configure parameters of adv_jtag_bridge on installation script. |
rfajardo |
4699d 09h |
/minsoc/trunk/utils/setup |
| 160 |
Typo in minsoc-install.sh script. Adv_jtag_bridge was not configuring correctly. |
rfajardo |
4699d 09h |
/minsoc/trunk/utils/setup |
| 159 |
Updated constraint file for de2_115 board. (Richard Hasha) |
rfajardo |
4699d 10h |
/minsoc/trunk/utils/setup |
| 158 |
Adding de2_115_board port, thanks to Richard Hasha.
Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.
Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.
Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.
prj/srcs extended to include jsp and interconnec_defines.v.
spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now. |
rfajardo |
4701d 02h |
/minsoc/trunk/utils/setup |
| 154 |
Modified to use the new autotools support in the advanced debug system v3.0. |
nyawn |
4706d 21h |
/minsoc/trunk/utils/setup |
| 149 |
Merging differences of release candidate 1.0 revision 140:148 with trunk. |
rfajardo |
4739d 11h |
/minsoc/trunk/utils/setup |
| 142 |
Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.
backend/xxx/configure: compiling firmwares here now. |
rfajardo |
4745d 10h |
/minsoc/trunk/utils/setup |
| 141 |
Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. |
rfajardo |
4745d 11h |
/minsoc/trunk/utils/setup |
| 135 |
Installation on Ubuntu-11.10 has shown that package texinfo is required to compiled GDB. This package installs the binary makeinfo. |
rfajardo |
4753d 06h |
/minsoc/trunk/utils/setup |
| 106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4772d 10h |
/minsoc/trunk/utils/setup |
| 103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4782d 02h |
/minsoc/trunk/utils/setup |
| 102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4782d 02h |
/minsoc/trunk/utils/setup |
| 83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4834d 12h |
/minsoc/trunk/utils/setup |
| 82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4837d 11h |
/minsoc/trunk/utils/setup |
| 81 |
Installation script complete, nice text feedback, output logs and better execution order. |
rfajardo |
4837d 22h |
/minsoc/trunk/utils/setup |
| 79 |
minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated |
rfajardo |
4841d 03h |
/minsoc/trunk/utils/setup |
