Rev |
Log message |
Author |
Age |
Path |
175 |
Too many `endifs added to minsoc_xilinx_internal_jtag.v in revision 174. Ronan reported it and one `endif has been removed. Thanks for that Ronan. |
rfajardo |
4133d 01h |
/minsoc |
174 |
Rok Krajnc port of the Altera DE1 board with a Cyclone II. Thanks a lot! |
rfajardo |
4168d 05h |
/minsoc |
173 |
Jay Aurabind's contribution of a port to the Nexys 3 board from Digilent. Thanks!! |
rfajardo |
4168d 06h |
/minsoc |
172 |
Reverting changes to tag. Tags should never be changed. |
rfajardo |
4217d 02h |
/minsoc |
171 |
Script for Minsoc deployment |
javieralso |
4245d 08h |
/minsoc |
170 |
Changed all links to minsoc.com/dep/trunk/ to solve the issues caused by sourceforge.com. |
ConX. |
4285d 05h |
/minsoc |
169 |
Changed all links to minsoc.com/dep/v.1.0/ to solve the issues caused by sourceforge.com. |
ConX. |
4285d 05h |
/minsoc |
168 |
Installation script has an option for advanced or resumed installation.
Advanced mode:
the script only downloads and installs the required tools. Dependency libraries and tools are checked during individual tool compilation. Furthermore, the install directory is not added to the system PATH. You have to do it yourself. Libusb, libftdi and Icarus Verilog are supposed to be installed by the user.
Resumed mode:
the script checks if the dependency libraries and tools are installed before doing anything. It also adds the installation directory to the system PATH variable for bash shells on HOME/.bashrc. Libusb, libftdi and Icarus Verilog are automatically installed for you.
Non standard configuration scripts that require or1200_defines.v to be tweaked will ask before doing so and backup the correspondent files. |
rfajardo |
4469d 08h |
/minsoc |
167 |
Ruben Diez fix to installation script problem in Windows:
minsoc-install.sh breaks if there are spaces in the PATH, which is rather common under Cygwin, as most Windows PCs have something like "C:\Program Files" in there. |
rfajardo |
4503d 11h |
/minsoc |
166 |
Turning on warnings for genera_bench.
Updating minsoc-install.sh to work better with directories and working around a missing inclusion of libftdi autotools. http://opencores.org/forum,OpenRISC,0,4685,1 |
rfajardo |
4517d 10h |
/minsoc |
165 |
Board contribution: nexys2_1200 (Thanks to Johan Granath)
spartan3e_starter_kit_eth/minsoc_bench_defines.v: deprecated definition updated |
rfajardo |
4534d 11h |
/minsoc |
164 |
Updating width of minsoc_tc_top.v for Wishbone B3 compliance. This file has never worked. This solves at least the bug that some signals were not being routed through. |
rfajardo |
4599d 03h |
/minsoc |
163 |
Adjusting internal initiator array widths. They were 1 bit too large. Thanks to R. Diez report.
These arrays abstract the complete initiator inputs. This way it is easier to route and arbiter using a single input.
Also removing 2 sequential delays. I didn't design them, so I can't tell if they were really useful/good. |
rfajardo |
4605d 10h |
/minsoc |
162 |
Tasks don't have parenthesis. This is only used for ports on modules. This was a mistake from my part. |
rfajardo |
4611d 05h |
/minsoc |
161 |
Correcting configure parameters of adv_jtag_bridge on installation script. |
rfajardo |
4624d 08h |
/minsoc |
160 |
Typo in minsoc-install.sh script. Adv_jtag_bridge was not configuring correctly. |
rfajardo |
4624d 08h |
/minsoc |
159 |
Updated constraint file for de2_115 board. (Richard Hasha) |
rfajardo |
4624d 09h |
/minsoc |
158 |
Adding de2_115_board port, thanks to Richard Hasha.
Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.
Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.
Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.
prj/srcs extended to include jsp and interconnec_defines.v.
spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now. |
rfajardo |
4626d 01h |
/minsoc |
157 |
Removed obsolete file; the changes in this version have been merged into
the mainline advanced debug system version 3.0 and higher. |
nyawn |
4631d 20h |
/minsoc |
156 |
Added hardware watchpoint indicators to debug unit break input, to allow
the debugger to break when a hardware watchpoint is triggered. |
nyawn |
4631d 20h |
/minsoc |