Rev |
Log message |
Author |
Age |
Path |
268 |
Added a 16-input external interrupt manager and dedicated SPI tx-only transmitter (for use with DACs, etc.). Also updated the soft-DACs with cleaned up HDL. |
jshamlet |
1455d 07h |
/open8_urisc/trunk |
267 |
Corrected the file description to indicate this is an example package. |
jshamlet |
1455d 07h |
/open8_urisc/trunk |
266 |
Accidentally uploaded incorrect example file for Open8_cfg.vhd |
jshamlet |
1455d 08h |
/open8_urisc/trunk |
265 |
Fixed a bug where "reg" wasn't being initialized with Poly_Init at reset. |
jshamlet |
1547d 16h |
/open8_urisc/trunk |
264 |
Updated comments |
jshamlet |
1557d 13h |
/open8_urisc/trunk |
263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1557d 14h |
/open8_urisc/trunk |
262 |
Added comments to LCD controllers - specifically that reading either register 0 or 1 will return the ready status. This code was already present, but not mentioned in the register map. |
jshamlet |
1566d 17h |
/open8_urisc/trunk |
261 |
Increased delay timer to 7 bits for button press detection. |
jshamlet |
1573d 17h |
/open8_urisc/trunk |
260 |
Added missing comments for Sequential_Interrupts generic, as well as comments explaining portions of the CPU operations. |
jshamlet |
1586d 16h |
/open8_urisc/trunk |
259 |
Fixed issue where Write_Fault wasn't defaulting to '0' when Write_Protect was set to FALSE,
Added a pulse interval measurement entity,
Fixed comments. |
jshamlet |
1586d 18h |
/open8_urisc/trunk |
258 |
Fixed write bug in o8_ltc2355_2p.vhd, added a newer Open8_cfg.vhd, and the sys_tick.vhd utility entity. |
jshamlet |
1587d 15h |
/open8_urisc/trunk |
257 |
Fixed misnamed signal in o8_7seg.vhd and added a replacement switch interface that handles both static and pushbutton switches. |
jshamlet |
1587d 16h |
/open8_urisc/trunk |
256 |
Removed unused generic from the status_led.vhd and cleaned up comments on the CPU |
jshamlet |
1587d 17h |
/open8_urisc/trunk |
255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1587d 22h |
/open8_urisc/trunk |
254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1588d 12h |
/open8_urisc/trunk |
253 |
Fixed spelling error in comment |
jshamlet |
1588d 13h |
/open8_urisc/trunk |
252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1588d 13h |
/open8_urisc/trunk |
251 |
Added RAM write fault detection, which can be used to indicate a memory write violation by the CPU. This allows a clean shutdown in the event of a memory problem/program crash.
Fixed a bug in the status_led.vhd entity that kept the flashing light function from working. The new code uses a maximal length 24-bit LFSR to create long delays. This is more efficient than a binary counter, but results in non-exact frequencies as a function of SYSTEM_FREQUENCY / (2^24-1).
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1588d 13h |
/open8_urisc/trunk |
250 |
Removed monitor RAM from SDLC model, as it is now proven to work. |
jshamlet |
1592d 21h |
/open8_urisc/trunk |
249 |
Added a 32-bit wide register and split the status_led core from o8_status_led.vhd, allowing it to be used as a subcomponent elsewhere. |
jshamlet |
1604d 13h |
/open8_urisc/trunk |