OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] - Rev 48

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
48 Greatly expanded the specification, including how to's, getting started guide,
register definitions, etc.		 dgisselq 2823d 13h /openarty
47 Updated. dgisselq 2841d 04h /openarty
46 Sped the UART simulator back up to 1MBaud. dgisselq 2841d 04h /openarty
45 Updated the flash, and the flash test bench, for Quad I/O read commands. dgisselq 2841d 04h /openarty
44 Fixed the flash so that it now runs in 1) high speed (41MHz), and 2) that it
doesn't struggle to do read bursts. This should greatly speed up access time.		 dgisselq 2841d 04h /openarty
43 Cleaned up the CPU memory documentation. dgisselq 2841d 04h /openarty
42 Fixed up the CPU so that it passes a multiply test bench, in addition to the
CPU test.		 dgisselq 2841d 04h /openarty
41 Added the CPU test program to the Arty distribution. This works. dgisselq 2841d 04h /openarty
40 Fixed a problem with the declaration of variables to be volatile. dgisselq 2841d 04h /openarty
39 Fixes the OLED test so that it runs using the DMA. dgisselq 2841d 04h /openarty
38 ZipLoad can now load programs to non-reset locations. dgisselq 2841d 04h /openarty
37 Updated documentation and copyright. dgisselq 2841d 04h /openarty
36 Lots of changes, see the git changelog for details. dgisselq 2847d 13h /openarty
35 Added comments and copyright notice. dgisselq 2851d 00h /openarty
34 These updates bring the distribution along to the point where both the GPS
clock subsecond tracking, as well as the OLEDrgb controller now work.		 dgisselq 2851d 02h /openarty
33 Fixed the network receive CRC and MAC checking, and added ip-checking and
minimum packet length checking to the receiver.		 dgisselq 2856d 09h /openarty
32 Brought the CPU to its first working version, to include demo. dgisselq 2857d 11h /openarty
31 Initial network is now working. Adding CPU control files to repository. dgisselq 2858d 04h /openarty
30 Network transmit and MIG memory both work now, though the clock speed has
been dropped to 80.125MHz.		 dgisselq 2858d 04h /openarty
29 Here's the memory pin list, necessary for running Xilinx's Memory Interface
Generator.		 dgisselq 2886d 01h /openarty

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.