OpenCores
URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [rtl/] [builddate.v] - Rev 49

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
49 Moved the location of the ZIPSYSTEM in memory, made the artyboard.h constants
more friendly and more complete, fixed two bugs in the CPU (jumps to breaks,
and s/w clearing of icache), added a NO_USERMODE option to the CPU, and more.
Rebuild any user programs before using this build.		 dgisselq 2738d 17h /openarty/trunk/rtl/builddate.v
44 Fixed the flash so that it now runs in 1) high speed (41MHz), and 2) that it
doesn't struggle to do read bursts. This should greatly speed up access time.		 dgisselq 2758d 21h /openarty/trunk/rtl/builddate.v
36 Lots of changes, see the git changelog for details. dgisselq 2765d 07h /openarty/trunk/rtl/builddate.v
34 These updates bring the distribution along to the point where both the GPS
clock subsecond tracking, as well as the OLEDrgb controller now work.		 dgisselq 2768d 20h /openarty/trunk/rtl/builddate.v
33 Fixed the network receive CRC and MAC checking, and added ip-checking and
minimum packet length checking to the receiver.		 dgisselq 2774d 02h /openarty/trunk/rtl/builddate.v
30 Network transmit and MIG memory both work now, though the clock speed has
been dropped to 80.125MHz.		 dgisselq 2775d 21h /openarty/trunk/rtl/builddate.v
25 The memory now works. However, the core speed has been lowered to 81.25MHz
to do this. The top level file is no longer fasttop.v, but toplevel.v.		 dgisselq 2812d 03h /openarty/trunk/rtl/builddate.v
13 Here are the updates necessary to get the initial Quad SPI flash driver working.
This includes in particular the bus interconnect (in fastmaster.v), and the
final hookup to the external wires (in fasttop.v).		 dgisselq 2842d 23h /openarty/trunk/rtl/builddate.v
12 A work in progress. This checkin contains fixes for the flash (mostly),
together with some logic reductions facilitating full speed (200MHz) build.		 dgisselq 2844d 01h /openarty/trunk/rtl/builddate.v
3 Initial set of files. The flash appears to work, memory hasn't been started,
the MDIO controller works in simulation, etc. Everything below fasttop.v works
at 200MHz (not the CPU---yet).		 dgisselq 2859d 05h /openarty/trunk/rtl/builddate.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.