Rev |
Log message |
Author |
Age |
Path |
202 |
Add DMA interface support + LINT cleanup |
olivier.girard |
3259d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
200 |
Major verificaiton and benchmark update to support both MSPGCC and RedHat/TI GCC toolchains. |
olivier.girard |
3420d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
192 |
Number of supported IRQs is now configurable to 14 (default), 30 or 62. |
olivier.girard |
3820d 23h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
175 |
Update hardware breakpoint unit with the followings:
- fixed hardware breakpoint bug with CALL instructions.
- modified data read watchpoint behavior to also trigger with read/modify/write instructions.
- removed unused ports. |
olivier.girard |
4141d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4248d 23h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4455d 23h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4729d 00h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4762d 23h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4818d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
4833d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4839d 05h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
4874d 21h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5202d 08h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
53 |
Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)
Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch. |
olivier.girard |
5241d 01h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5270d 00h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5270d 01h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5391d 03h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
17 |
Updated header with SVN info |
olivier.girard |
5416d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5451d 22h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |