Rev |
Log message |
Author |
Age |
Path |
868 |
Declare du_flush_pipe in or1200_top
Signed-off-by: Olof Kindgren <olof at opencores.org> |
olof |
3648d 20h |
/openrisc/trunk/or1200/rtl/verilog |
865 |
Raise illegal instruction exception when l.ror is not implemented
Instead of throwing an illegal instruction exception when the rotate
instructions are disabled (OR1200_ALU_IMPL_ROTATE is undefined), another
instruction (slr?) was executed instead.
This closes bug 97
Signed-off-by: Olof Kindgren <olof at opencores.org>
acked-by: Julius Baxter <julius at opencores.org> |
olof |
3979d 18h |
/openrisc/trunk/or1200/rtl/verilog |
859 |
Execute trapped instruction after breakpoint is removed
Closes bug #104
When the instruction replaced by a trap instruction is restored by the
debugger, this instruction is not executed.
Proposed solution:
- Checked for a debug unstall condition plus a trap condition in
or1200_du(dbg_stall && |except_stop).
- Then, when this event occur, flush the entire pipeline (in or1200_ctrl) and
set the pc to npc in or1200_genpc(which is equal to the trapped instruction
address).
Signed-off-by: Franck Jullien <crevars at opencores.org>
acked-by: Olof Kindgren <olof at opencores.org> |
olof |
4093d 07h |
/openrisc/trunk/or1200/rtl/verilog |
852 |
Declare pcreg_boot before usage
When things were moved around in rev 813, this error was introduced
Signed-off-by: Olof Kindgren <olof at opencores.org>
acked-by: Julius Baxter <julius at opencores.org> |
olof |
4325d 08h |
/openrisc/trunk/or1200/rtl/verilog |
847 |
or1200_genpc: fix ipcu_cycstb_o generation
In some circumstances the CPU is still waiting for the lsu to finish
while in a pre branch state. However, ipcu_cycstb_o is set and the cycle
starts with the wrong address on the iwb bus (the one before the
branched address).
This fixes this issue.
Patch by: Franck Jullien <franck.jullien@gmail.com> |
stekern |
4340d 00h |
/openrisc/trunk/or1200/rtl/verilog |
846 |
or1200: Fix for cache bug related to first_{hit|miss}_ack
Under certain circumstances, when first_hit_ack and
first_miss_ack is asserted at the same time, cache data
would wrongly be overwritten with bus data.
Patch by: Matthew Hicks <firefalcon@gmail.com> |
stekern |
4340d 00h |
/openrisc/trunk/or1200/rtl/verilog |
845 |
or1200: l.lws support
Using the l.lws instruction doesn't work currently.
It simply skips the instruction. No exception or reaction.
The patch attached simply duplicates the behaviour of
l.lwz for l.lws.
Patch by: Jeppe Græsdal Johansen <jjohan07@student.aau.dk> |
stekern |
4340d 00h |
/openrisc/trunk/or1200/rtl/verilog |
815 |
OR1200 debug unit: prevent deadlock when trap instruction stalls
As per mailing list post <20120925160925.5725e06f@latmask.vernier.se>,
the debug unit could deadlock with the instruction decoder if the trap
instruction is held back by a pipeline stall. This change prevents that.
The problem can be reproduced by placing a breakpoint at an unfavorable
position with instruction cache enabled. In our test, this occurred
with or1200-cbasic when placing a breakpoint at test_bss using gdb, but
this is dependent on such factors as cache parameters and compilation
result. |
yannv |
4360d 17h |
/openrisc/trunk/or1200/rtl/verilog |
813 |
or1200: Set correct PC after reset when parameter boot_adr is used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4375d 10h |
/openrisc/trunk/or1200/rtl/verilog |
808 |
OR1200: Add DSX bit support to SR.
Updated documentation, revision is now 13.
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=85 |
julius |
4491d 03h |
/openrisc/trunk/or1200/rtl/verilog |
806 |
OR1200: Fix for bug 90
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=90 |
julius |
4491d 04h |
/openrisc/trunk/or1200/rtl/verilog |
804 |
OR1200: Fix for bug 91
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=91 |
julius |
4491d 04h |
/openrisc/trunk/or1200/rtl/verilog |
802 |
OR1200: Fix for bug 88
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=88 |
julius |
4496d 09h |
/openrisc/trunk/or1200/rtl/verilog |
794 |
ORPSoC, or1200: split out or1200_fpu_intfloat_conv_except module into own file
Fixes lint warnings. |
julius |
4529d 19h |
/openrisc/trunk/or1200/rtl/verilog |
788 |
or1200: Patch from R Diez to remove l.cust5 signal from a sensitivty list when it's not defined.
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4554d 09h |
/openrisc/trunk/or1200/rtl/verilog |
679 |
Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4578d 09h |
/openrisc/trunk/or1200/rtl/verilog |
674 |
or1200: Fix for Bug 76 - Incorrect unsigned integer less-than compare with COMP3 option enabled |
julius |
4620d 17h |
/openrisc/trunk/or1200/rtl/verilog |
644 |
or1200: the infamous l.rfe fix, and bug fix for when multiply is disabled |
julius |
4759d 08h |
/openrisc/trunk/or1200/rtl/verilog |
643 |
or1200: new ALU comparision implementation option, TLB invalidate register indicated as not present, multiply overflow detection bug fix |
julius |
4759d 08h |
/openrisc/trunk/or1200/rtl/verilog |
642 |
or1200: add carry, overflow bits, and range exception |
julius |
4759d 08h |
/openrisc/trunk/or1200/rtl/verilog |