Rev |
Log message |
Author |
Age |
Path |
853 |
Declare pcreg_boot before usage
When things were moved around in rev 813, this error was introduced
Signed-off-by: Olof Kindgren <olof at opencores.org>
acked-by: Julius Baxter <julius at opencores.org> |
olof |
4360d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
850 |
or1200_genpc: fix ipcu_cycstb_o generation
In some circumstances the CPU is still waiting for the lsu to finish
while in a pre branch state. However, ipcu_cycstb_o is set and the cycle
starts with the wrong address on the iwb bus (the one before the
branched address).
This fixes this issue.
Patch by: Franck Jullien <franck.jullien@gmail.com> |
stekern |
4375d 01h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
849 |
or1200: Fix for cache bug related to first_{hit|miss}_ack
Under certain circumstances, when first_hit_ack and
first_miss_ack is asserted at the same time, cache data
would wrongly be overwritten with bus data.
Patch by: Matthew Hicks <firefalcon@gmail.com> |
stekern |
4375d 01h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
848 |
or1200: l.lws support
Using the l.lws instruction doesn't work currently.
It simply skips the instruction. No exception or reaction.
The patch attached simply duplicates the behaviour of
l.lwz for l.lws.
Patch by: Jeppe Græsdal Johansen <jjohan07@student.aau.dk> |
stekern |
4375d 01h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
815 |
OR1200 debug unit: prevent deadlock when trap instruction stalls
As per mailing list post <20120925160925.5725e06f@latmask.vernier.se>,
the debug unit could deadlock with the instruction decoder if the trap
instruction is held back by a pipeline stall. This change prevents that.
The problem can be reproduced by placing a breakpoint at an unfavorable
position with instruction cache enabled. In our test, this occurred
with or1200-cbasic when placing a breakpoint at test_bss using gdb, but
this is dependent on such factors as cache parameters and compilation
result. |
yannv |
4395d 19h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
814 |
orpsoc/or1200: Set correct PC after reset when parameter boot_adr is used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4410d 12h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
807 |
ORPSoC: Commit for bug 85 - add DSX support to OR1200.
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=85
Also added software tests, and added these tests to default regression test list |
julius |
4526d 05h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
805 |
ORPSoC: Fix for bug 90 - EPCR on range exception bug
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=90 |
julius |
4526d 06h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
803 |
ORPSoC: Fix for bug 91, l.sub not setting overflow flag correctly
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=91 |
julius |
4526d 06h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
801 |
ORPSoC: Fix bug 88
http://bugzilla.opencores.org/bugzilla4/show_bug.cgi?id=88 |
julius |
4531d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
794 |
ORPSoC, or1200: split out or1200_fpu_intfloat_conv_except module into own file
Fixes lint warnings. |
julius |
4564d 21h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
788 |
or1200: Patch from R Diez to remove l.cust5 signal from a sensitivty list when it's not defined.
Signed-off-by: R Diez <rdiezmail-openrisc@yahoo.de>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
julius |
4589d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
679 |
Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used
Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com> |
olof |
4613d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
672 |
ORPSoC: Fix Bug 76 - Incorrect unsigned integer less-than compare with COMP3 option enabled
OR1200 RTL fix and software test added. |
julius |
4692d 06h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
619 |
ORPSoC OR1200 fix and regression test for bug 51.
signed-off Julius Baxter
reviewed by Stefan Kristiansson |
julius |
4824d 08h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
537 |
ORPSoC or1200 fix for l.rfe bug, and when multiply is disabled. |
julius |
4910d 07h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
505 |
OR1200 overflow detection fixup
SPIflash program update
or1200 driver library timer improvement |
julius |
4948d 14h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
504 |
ORPSoC ALU update with new comparison configuration option, software test for comparisons and register file comment cleanup |
julius |
4965d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
502 |
ORPSoC update - or1200, ethmac Xilinx fifos
or1200 in ORPSoC has carry bit, overflow bit, and range exception added and tested. New software tests in ORPSoC library. Ml501 build had ethmac fifos added, and or1200_defines updated to use these new or1200 features by default |
julius |
4968d 10h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |
501 |
ORPSoC or1200 mult/mac/divide unit serial arith bug fixed.
ORPSoC or1200 defines now use serial divide by default |
julius |
4969d 11h |
/openrisc/trunk/orpsocv2/rtl/verilog/or1200 |