Rev |
Log message |
Author |
Age |
Path |
1308 |
Gyorgy Jeney: extensive cleanup |
phoenix |
7322d 08h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1244 |
Added "cm" command to copy data inside memory.
Make or1ksim work on little endian platforms.
Port to Mac OS X.
Some bugfixes.
Allow JTAG write access to read-only memory regions. |
hpanther |
7489d 16h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1165 |
timeout bug fixed; contribution by Carlos |
markom |
7728d 15h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1153 |
When multiple interrupts were pending, e.g. TX buffer empty and RX
available, reading the UART's IIR register could potentially clear a
TX interrupt before it had been sent to the processor, thus dropping
the interrupt permanently.
Fix tested w/ both eCos and uclinux. |
sfurman |
7786d 10h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1145 |
1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the
last check-in.
2) Improve printed output from debugging-only uart_status() routine. |
sfurman |
7787d 04h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1143 |
Make UART transmitter-empty interrupts match both 16450 and 16550 behavior. |
sfurman |
7790d 00h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1116 |
There was a bug in the simulator's UART implementation that caused the
UART's LSR register to become corrupted. This was due to an
assumption that 'char' is an unsigned type, but that is not true on
all platforms.
When the char type is signed and a character is read in the range
0x80-0xff, the high bit is sign-extended into the upper bits of an
entry in the receive FIFO. When the character reaches the head of the
FIFO, the upper bits of the FIFO entry are OR'ed into the LSR, causing
the LSR to be set to 0xFF.
A simple cast fixes the problem. |
sfurman |
7830d 08h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
1073 |
channels support |
rprescott |
7955d 12h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
997 |
PRINTF should be used instead of printf; command redirection repaired |
markom |
8018d 22h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
970 |
Testbench is now running on ORP architecture platform. |
simons |
8026d 09h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
884 |
code cleaning - a lot of global variables moved to runtime struct |
markom |
8062d 20h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
821 |
ugly bug with duplicate redefined i removed |
markom |
8148d 17h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
806 |
uart now partially uses scheduler |
markom |
8153d 23h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
805 |
kbd, fb, vga devices now uses scheduler |
markom |
8154d 00h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
713 |
lot of small minor improvements: code documented, cleaned; runs at about same speed when not actually logging, but exe_log is enabled; raw_stats now run only with simple execution - enable RAW_USAGE_STATS macro |
markom |
8190d 21h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
549 |
enabled parameters removed from devices, which also have number of devices; command line --output-cfg parameter added |
markom |
8244d 17h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
530 |
THRI interrupt fixed. |
simons |
8247d 11h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
529 |
Bug in receiver fixed. |
simons |
8247d 13h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
492 |
uart THRE interrupt immedialty after write to IER |
markom |
8263d 20h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |
490 |
clkcycle parsing problem fixed |
markom |
8264d 16h |
/or1k/tags/nog_patch_49/or1ksim/peripheral/16450.c |