| Rev |
Log message |
Author |
Age |
Path |
| 1145 |
1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the
last check-in.
2) Improve printed output from debugging-only uart_status() routine. |
sfurman |
7788d 08h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 1143 |
Make UART transmitter-empty interrupts match both 16450 and 16550 behavior. |
sfurman |
7791d 04h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 1116 |
There was a bug in the simulator's UART implementation that caused the
UART's LSR register to become corrupted. This was due to an
assumption that 'char' is an unsigned type, but that is not true on
all platforms.
When the char type is signed and a character is read in the range
0x80-0xff, the high bit is sign-extended into the upper bits of an
entry in the receive FIFO. When the character reaches the head of the
FIFO, the upper bits of the FIFO entry are OR'ed into the LSR, causing
the LSR to be set to 0xFF.
A simple cast fixes the problem. |
sfurman |
7831d 12h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 1073 |
channels support |
rprescott |
7956d 16h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 997 |
PRINTF should be used instead of printf; command redirection repaired |
markom |
8020d 02h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 970 |
Testbench is now running on ORP architecture platform. |
simons |
8027d 12h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 884 |
code cleaning - a lot of global variables moved to runtime struct |
markom |
8064d 00h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 821 |
ugly bug with duplicate redefined i removed |
markom |
8149d 20h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 806 |
uart now partially uses scheduler |
markom |
8155d 03h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 805 |
kbd, fb, vga devices now uses scheduler |
markom |
8155d 03h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 713 |
lot of small minor improvements: code documented, cleaned; runs at about same speed when not actually logging, but exe_log is enabled; raw_stats now run only with simple execution - enable RAW_USAGE_STATS macro |
markom |
8192d 01h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 549 |
enabled parameters removed from devices, which also have number of devices; command line --output-cfg parameter added |
markom |
8245d 21h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 530 |
THRI interrupt fixed. |
simons |
8248d 14h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 529 |
Bug in receiver fixed. |
simons |
8248d 16h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 492 |
uart THRE interrupt immedialty after write to IER |
markom |
8265d 00h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 490 |
clkcycle parsing problem fixed |
markom |
8265d 20h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 424 |
memory configuration file joined into .cfg file; *mem.cfg are obsolete; read-only and write-only memory is supported; memory logging is not yet supported; update of testbench - only cache test fails, since it writes to RO memory |
markom |
8275d 00h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 423 |
changed break behaviour and interrupt pending; interrupt line chabnged to 15; sync bug in mode switch |
markom |
8275d 19h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 411 |
acv uart testsuite now works (without modem test) |
markom |
8279d 00h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
| 409 |
some minor changes to or1ksim; Testbench except.s modified. Interrupt test almost finished for uart ACV. |
markom |
8280d 00h |
/or1k/tags/stable_0_1_0/or1ksim/peripheral/16450.c |
