Rev |
Log message |
Author |
Age |
Path |
29 |
Well, added a testcase for testing the ALU bitwise operations and found a very large problem.
I'm pretty sure that the decoder needs to be partially unclocked because it essentially makes the ALU clocked how it is now, which is very bad. |
earlz |
4525d 20h |
/tinycpu |
28 |
Ok now registerfile is correct. Only using rising_edge. Now DataOut is the same as DataIn when WriteEnable is asserted.
Some of my tests had to be changed because I was expecting the DataOut to be updated 1 clock cycle after the instruction rather than on the same clock cycle.
Now it's truly single-cycle and without all the weird regIn stuff on the carryovers |
earlz |
4526d 14h |
/tinycpu |
27 |
Added a few ALU opcodes and came across a weird propogation delay issue with my registerfile.
As a workaround, I'm trying to use falling_edge instead of rising_edge. We shall see if I regret this later |
earlz |
4526d 20h |
/tinycpu |
26 |
Added extra check to make sure fetcher works properly after memory write |
earlz |
4526d 21h |
/tinycpu |
25 |
Wait for memory state now works as expected, and opcode `mov [reg], immd` works now |
earlz |
4527d 01h |
/tinycpu |
24 |
Good news, mov to IP actually works as expected! |
earlz |
4527d 19h |
/tinycpu |
23 |
Added top module for testing how our memory and cpu will work together. (hint: success)
Messing around with a small timing issue in core |
earlz |
4527d 19h |
/tinycpu |
22 |
Added to process sensitivity list to avoid warning and added ELSE for IR so it doesn't generate a latch |
earlz |
4528d 11h |
/tinycpu |
21 |
The core_tb testbench finally passes. It probably doesn't synthesize, or even pass other testbenches, but it passes that one damn it. |
earlz |
4528d 11h |
/tinycpu |
20 |
fuck it. All sorts of broken, will try to fix it tomorrow |
earlz |
4529d 11h |
/tinycpu |
19 |
Got beginning of core/decoder for the CPU |
earlz |
4529d 13h |
/tinycpu |
18 |
Finished memory controller |
earlz |
4532d 22h |
/tinycpu |
17 |
Added fetch component for fetching from memory to instruction register
Added additional testing for carryover to make sure it's correct |
earlz |
4533d 12h |
/tinycpu |
16 |
Renamed incdec to carryover (see design for why).
carryover should be done, though may change the "straight through on disable" behavior to instead leaving it floating depending on how things go later with coding. |
earlz |
4536d 14h |
/tinycpu |
15 |
Added README, LICENSE, and the (so far not created) incdec component |
earlz |
4538d 12h |
/tinycpu |
14 |
Added ALU with all the operations we'll need. Synthesizes as well trivially |
earlz |
4538d 20h |
/tinycpu |
13 |
Forgot about the new library I added |
earlz |
4538d 22h |
/tinycpu |
12 |
registerfile has ports for every register now
makefile now uses GHW file format for gtkwave instead of VCD |
earlz |
4538d 23h |
/tinycpu |
11 |
Finally, it synthesizes to BRAM.. Possibly need to fix how the DataOut syncs with WriteEnable and Address though if I plan to both read and write on the same clock edge |
earlz |
4542d 12h |
/tinycpu |
10 |
Just committing so I can keep this original that passes simulation, but still synthesizes to LUTs |
earlz |
4542d 13h |
/tinycpu |